• Spectral range extends over 5.5 µm.
• Large active area with front-side illumination.
• No minimum order quantity required.

• LabM-I-5 detection module.
• PVIA-5-1x1-TO39-NW-36 RoHS-compliant detector.
• PVMA-1TE-5-1x1-TO39-pSiAR-70 RoHS-compliant detector.
• AMS3140-01 RoHS-compliant detection module.

• Contactless temperature measurement in railway transport and industrial processes.
• Flame and explosion detection.
• Threat warning systems and thermal signature detection.
• Gas detection and analysis for various gases including CH4, C2H2, and CO2.
• Breath analysis and gas leak detection.
• Combustion process control and non-destructive material testing.

The PC-5 Detector Series includes models with thermoelectric cooling and various package options. The detectors have a typical peak wavelength of 4.5 µm and a cut-off wavelength of 5.5 µm.

At an ambient temperature of 293 K and bias voltage of 1.0 V, the detectors exhibit specific detectivity and current responsivity values. The PC-2TE-5-1x1-TO8-wAl2O3-70 model has a typical detectivity of 2.0×10¹⁰ cm·Hz^1/2/W at peak wavelength.

Technical drawings are available for the 2TE-TO8 and 2TE-TO66 package options.

• AIP, PIP, MIP, and SIP-TO8 series amplifiers are recommended for use with the PC-2TE-5-1x1-TO8-wAl2O3-70 detector.

• Operating temperature range: -20 to 30 °C.
• Storage temperature range: -20 to 50 °C.
• Maximum soldering temperature: ≤300 °C for 5 seconds.
• Storage humidity: 10 to 90% without dew condensation.
• Maximum incident optical power density: 100 W/cm² for continuous wave, 1 MW/cm² for pulses <1 µs.
• Maximum bias voltage: 2.0 V.
• Maximum TEC voltage and current: 1.0 V and 1.2 A respectively.

Exceeding these ratings may cause permanent damage to the device.