IC01410-01, IC01420-01

Product catalog summary

Introduction
This document is a preliminary datasheet for the InGaAs room-temperature infrared detection modules IC01410-01 and IC01420-01, featuring an integrated ASIC-type amplifier. These modules are designed for various applications including gas detection, telecommunications, and LIDAR systems.

Features

Cut-off wavelength of 1.7 μm
RoHS-compliant III-V material
Anti-reflection coating on the active element
Front-side illuminated with ASIC-type electronics
Programmable gain and DC coupling (AC coupling available on request)
Compact, surface-mount package with long-term stability and reliability
High ambient operating and storage temperature with low power consumption
Option to mount optical filters

Applications

Gas detection, monitoring, and analysis (e.g., CH4)
Telecommunications
LIDARs and laser range finders
Laser warning systems and life tests for lasers and diodes
Food and pharmaceutical analysis

Detection Module Configuration
The detection modules are available in two configurations:

IC01410-01: No cooling, TO39 cap, ~70° acceptance angle, wedged sapphire window
IC01420-01: Square-shaped cap, ≥140° acceptance angle

Specifications
At an ambient temperature of 293 K and a load resistance of 50 Ω, the modules have the following specifications:

Active element temperature: Tchip = Tamb - 293 K
Peak wavelength: 1.62±0.03 μm
Cut-off wavelength: 1.69 to 1.71 μm
Detectivity: 2.5×10¹⁰ cm·Hz^1/2/W
Output noise voltage density: 910 nV/Hz^1/2
Voltage responsivity: 2.56×10⁵ V/W
Transimpedance: 256 to 10,000 kV/A
Low cut-off frequency: 0 Hz (DC coupling)
High cut-off frequency: 1 MHz
Output impedance: 50 Ω
Reference voltage output: 1 V
Power supply voltage: 3.3 V
Power consumption: 0.15 W

Mechanical Layout and Signal Output
Technical drawings for both IC01410-01 and IC01420-01 detection modules are provided.

Absolute Maximum Ratings

Ambient operating temperature: -20 to 70 °C
Storage temperature: -20 to 70 °C
Storage humidity: 10 to 90% (no dew condensation)

Exceeding these ratings may cause permanent damage to the device and affect its quality and reliability.

Catalog excerpts

InGaAs room-temperature infrared detection modules with an integrated ASIC-type amplifier FEATURES APPLICATIONS • Cut-off wavelength: 1.7 pm • RoHS-compliant III-V material • Anti-reflection coating on the active element • Front-side illuminated • ASIC-type electronics • Programmable gain • DC coupling (AC coupling on request) • Compact, surface-mount type package • Long-term stability and reliability • High ambient operating and storage temperature • Possibility of mounting optical filters • Gas detection, monitoring and analysis: CH4 • Laser range finders, laser warning systems • Lasers and diodes life tests • Food analysis • Pharmaceutical analysis DETECTION MODULE CONFIGURATION Detection module symbol SPECIFICATION (Tamb = 293 K, Rload = 50 O) Parameter VIGO Photonics S.A. reserves the right to change these specifications at any time without notification.

Open the catalog to page 1

IC01410-01, IC01420-01 DETECTION MODULES PRELIMINARY DATASHEET Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. Constant or repeated exposure to absolute maximum rating conditions may affect the quality and reliability of the device. VIGO Photonics S.A. reserves the right to change these specifications at any time without notification.

Open the catalog to page 2

IC01410-01, IC01420-01

IC01410-01, IC01420-01

Catalog excerpts

All Vigo Photonics catalogs and technical brochures