1. Catalogs
  2. Vigo Photonics
  3. 32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES
video corpo

32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES

32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES

32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES

Product catalog summary
Overview: The 32EM-5 series consists of 32-channel IR detection modules featuring a thermoelectrically cooled MWIR HgCdTe photovoltaic detector integrated with a DC-coupled 32-channel transimpedance preamplifier. These modules are designed for research and development purposes, and specifications are subject to change.
Specifications:
  • Optical Characteristics: The 32EM-5-01 and 32EM-5-02 models have different cut-on, peak, and cut-off wavelengths, with detectivity values varying between the models.
  • Electrical Parameters: Both models have a low cut-off frequency of DC and high cut-off frequencies of ≥400 kHz and ≥650 kHz, respectively. They operate with a power supply voltage of +5 VDC.
  • Mechanical Layout: The active elements are arranged in a linear array with specific dimensions and spacing.
Features: The modules offer high sensitivity, high-speed response, low crosstalk, and compact size. They require an external heatsink and TEC controller for optimal operation.
Applications: These modules are suitable for spectroscopy, temperature measurement, optical sorting, laser beam profiling, flame detection, and defense applications.
Thermoelectric Cooler Parameters: The active element temperature is approximately 230 K, with maximum TEC voltage and current of 3.7 V and 0.8 A, respectively.
Temperature Sensor: A built-in thermistor allows precise temperature control of the detector's active elements. The thermistor's power dissipation should not exceed 0.2 mW for accurate measurements.
Thermistor Characteristics: The document provides a detailed table of resistance versus temperature for the thermistor, highlighting the importance of careful bias selection to ensure accurate temperature readings.
See more

Catalog excerpts

32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES-1

SYSTEM 32EM-5 detection modules series 32EM-5 is a series of 32-channel detection modules. Thermoelectrically cooled MWIR 32-element HgCdTe photovoltaic detector is integrated with DC-coupled 32-channel transimpedance preamplifier. Spectral response (Ta = 20°C, Vb = 0 mV) Specification (Ta = 20°C, Vb = 0 mV) Features ■ High sensitivity ■ Compact small size ■ Convenient cryogenic-free operation ■ External heatsink is necessary (recommended thermal resistance: ~2 K/W) ■ External TEC controller is necessary Applications ■ Spectroscopy (gas detection, breath analysis) ■ Slow and fast contactless temperature measurement (railway transport, industrial and laboratory processes monitoring) ■ Optical sorting systems ■ Laser beam profiling and positioning ■ Flame and explosion detection ■ Combustion process control Engineering samples are manufactured for purposes of research and development. Values of parameters mentioned in the datasheet are for guidance only and may not be used as guaranteed values. VIGO System S.A. reserves the right to change these specifications at any time without notification.

 Open the catalog to page 1
32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES-2

32EM-5 detection modules series XJiGOSYSTEM Mechanical layout, mm Details of active elements area Assembly diagram TEC supply input (+) TEC+ 1 Power supply input (+) +Vsup 3 Power supply input (-) —Vsup 22 Thermoelectric cooler parameters Engineering samples are manufactured for purposes of research and development. Values of parameters mentioned in the datasheet are for guidance only and may not be used as guaranteed values. VIGO System S.A. reserves the right to change these specifications at any time without notification.

 Open the catalog to page 2
32EM-5-01, 32EM-5-02 – ENGINEERING SAMPLES-3

32EM-5 detection modules series 32EM-5 series modules are equipped with the built-in thermistor to provide precise control and measurements of detector active elements temperature. The maximal power dissipated by the thermistor should not exceed 0.2 mW, therefore its bias must be carefully chosen. To provide accurate temperature measurement, this power should not exceed 0.03 mW. Resistance vs. temperature of the thermistor T,~K I T,'°C Engineering samples are manufactured for purposes of research and development. Values of parameters mentioned in the datasheet are for guidance only and may not...

 Open the catalog to page 3

All Vigo Photonics catalogs and technical brochures

  1. 4EM-5

    2  Pages

  2. microM-10.6

    3  Pages

  3. LabM-I-4

    3  Pages

  4. AM03100-02

    6  Pages

  5. FIP series

    2  Pages

  6. PIP SERIES

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.