Heating systems ◄ Industrial energy systems Refrigeration systems

DHW convenience for every demand The demand for hot water is completely different in every household. One factor is the number of residents and another is their bathing and showering habits. For example, if three members of a family set off for work and school at the same time, lots of hot water needs to be continuously available for showers in short order. Those who prefer a bath will also want to have enough hot water to fill the tub. The DHW cylinder should also be able to provide sufficient water if, in an apartment building for example, hot water is drawn from more than one outlet at the...

In the Vitocell cylinder range, you'll find exactly the right DHW cylinder for your requirements. Depending on the application and installation options, select a DHW cylinder from our extensive product range. Two energy efficiency classes By default, most DHW cylinders with a compulsory identification cylinder capacity (up to 500 l capacity) meet energy efficiency class B. For selected cylinder types, it is also possible to choose between energy efficiency class A or B. Cylinders in class A are thermally insulated with an additional vacuum panel which reduces heat losses and therefore energy...

Stainless steel cylinder Inspection and cleaning aperture Stainless steel indirect coil drawn right down to the cylinder floor – this heats the DHW cylinder fully and hygienically Flanged aperture as additional cleaning aperture or for the installation of an immersion heater All-round CFC-free thermal insulation made from rigid polyurethane foam Vitocell 300‑V (type EVI, 200 and 300 litre cylinder capacity, with flanged aper

160 and 20 0 l capacity also available in white

Vitocell 100‑V (type CVAA-A, 200 l cylinder capacity) Cylinder and indirect coil made of steel, with Ceraprotect enamel coating Magnesium or impressed current anode Internal indirect coil stretching right down to the cylinder floor heats up the entire water content All-round CFC-free thermal insulation made from rigid polyurethane foam Vacuum pa

160 and 200 litre capacity without flanged aperture; 300 litre capacity with flanged aperture Also available in white

DHW cylinders for wall mounted boilers Cylinder and indirect coil made of steel, with Ceraprotect enamel coating Magnesium or impressed current anode Internal indirect coil stretching right down to the cylinder floor heats up the entire water content All-round CFC-free thermal insulation made from rigid polyurethane foam Vacuum pa

High grade stainless steel cylinder Stainless steel indirect coil reaching right to the cylinder floor heats the entire water content DHW connection DHW circulation connection Inspection and cleaning aperture Highly effective all-round CFC-free thermal insulation made from rigid polyurethane foam

DHW cylinder (dual mode) Stainless steel cylinder Upper inspection and cleaning aperture Upper indirect coil – for reheating by the boiler All-round CFC-free thermal insulation made from rigid polyurethane foam Lower indirect coil – solar collector connection Front inspection and cleaning aperture (also for installation of an immersion heat

DHW cylinder (dual mode) 4 J J J J \ Cylinder and indirect coils made of steel, with Ceraprotect enamel coating Magnesium or impressed current anode Upper indirect coil - for reheating by the boiler Immersion heater connection Lower indirect coil - solar collector connection All-round CFC-free thermal insulation made from rigid polyurethane foam Inspection and cleaning aperture (also for installation of an immersion heater) Vitocell 100-B (type CVBB)

Also available in white 400 l capacity also available in white

DHW cylinder (dual mode) with immersion heater Cylinder and indirect coil made of steel, with Ceraprotect enamel coating Magnesium or impressed current anode Internal indirect coil – for reheating by the boiler Sensor well Cleaning aperture Dry immersion heater for limescaleresistant heating All-round CFC-free thermal insulation made from rigid polyurethane

Note: DHW cylinder Vitocell 100-B, type CVE with immersion heater EHE, for DHW heating with power generated on site (e.g. by a photovoltaic system) and an internal indirect coil for reheating by the boiler.

Compact cylinder (dual mode) i| Inspection and cleaning aperture z| Steel cylinder with Ceraprotect enamel coating J Magnesium or impressed current anode □ All-round thermal insulation s| Upper indirect coil - for reheating by the boiler J Lower indirect coil - solar collector connection 7I Solar circuit pump J Solar-Divicon Nl SMI solar control module Vitocell 100-B (type CVBA)

With solar control module (SM1) for operation via a Vitotronic control unit Type Vitocell 1 00-B only available as part of a pack together with Vitosol 200-F, type SVK/SVKA. Also available in white For Viessmann boilers with the Vitotronic 1 00 control unit (types HC1A, HC1B, KC2B, KC4B), Vitotronic 20 0 (types HO1A, HO1B, HO1C, HO1D, HO1E, KO1B, KO2B, KW6A, KW6B), the Vitocell 1 00-B must be ordered with the solar control module (type SM1). With Vitosolic 100 (SD1) Type Vitocell 100-B only available as part of a pack together with Vitosol 200-F, type SVK/SVKA. Also available in white The Vitocell...

Compact cylinder (dual mode) Cylinder and indirect coils made of steel, with Ceraprotect enamel coating Magnesium or impressed current anode Solar-Set with solar control module or Vitosolic 100, flushing facility, air separator, pipework and variable speedhigh efficiency circulation pump Upper indirect coil – for reheating by the boiler Lower indirect coil – solar collector connection All-round CFC-free thermal insulation made from rigid polyur

VITOCELL 100-UWith solar control module (SM1) for operation via a Vitotronic control unit Type Also available in white For Viessmann boilers with the Vitotronic 1 00 control unit (types HC1A, HC1B, KC2B, KC4B), Vitotronic 20 0 (types HO1A, HO1B, HO1C, HO1D, HO1E, KO1B, KO2B, KW6A, KW6B), the Vitocell 1 00-W (type CUVB) must be ordered with the solar control module (type SM1). Also available in white The Vitocell 100-U with Vitosolic 100 (type SD1) must be ordered if an existing system is being retrofitted with a predecessor control unit. Permissible operating pressure on the heating water side bar 10...