V6000
2Pages

Machinery Protection System V6000 - V6000 system is a total solution for the vibration measurement and continuous on-line protection with condition monitoring (optional) of medium to large sized critical plant machinery 2 configurations available: I) Vibration Protection System Easy setup with V6000 configuration tool for performing protection monitoring of one or several machines. Measured values are shown on the local indicators and also transmitted to PLC/ DCS/ HMI with Modbus RS485 or 4-20 mA output. II) Protection & Conditional Monitoring Connecting to condition monitoring and diagnostic software easily whatever. With V6000 there are no external modules, no additional wiring and no extra rack slots required. Simply use the Ethernet port in the V6000-G Rack Interface Module and a single network cable to communicate with our Vibsens-PRO software Description of various V6000 cards: V6000-G Communication Gateway (Optional): V6000-M 19” System Rack (required): Turbine f Wind Turbine Hydro Turbine The V6000 System monitor supports Modbus® protocol via serial (RS232/485) for digital communications with PLCs, DCSs and other instrument and automation platforms. Key lockable to prevent unauthorized tampering Buffered Outputs Every dynamic input signal is available on the front panel via BNC connectors for easy connection to portable data loggers / test instruments. Ethernet interface with Vibsens-PRO condition monitoring software via TCP/IP protocols Each monitor features a high visibility digital LED display. The displays show current values, set points and alarm status etc. In addition, operator can configure all settings for each input. Analog Communications H V6000-M Multifunction Monitor (Optional): All monitor module channels are available with analog 4-20 mA proportional outputs for compatibility with recorders, process control systems and other instrumentation. This card can accept up to 8 4-20 mA process inputs and it has 8 configurable dry relays._ Vibsens: www.Vibsens.com | info@Vibsens.com | +90 2324000570 Address: Adalet mahallesi, Manas Bulvari, Folkart Towers No.30/3408 Bayrakli /izmir Aluminum Alloy - 426*277*259 mm All input and output terminals are available on the back plane with push-in type connectors._ Accepts worldwide ac/dc voltages and frequencies and can be supplied redundant to assure uninterrupted the process Trip Multiply Factor Includes relay bypass and trip multiply configurable per channel This card can process up to two tachometers for phase & speed measurements with 8 configurable _dry relay outputs._ ji|l |l" Vibsens— Vibration monitoring system

Characteristics HMI (RS-485 Ethernet Radial Shaft Phase Vibration Reference High Pressure Turbine Analogue inputs *i|| ||i< Vibsens-Vibration monitoring system Vibsens: www.Vibsens.com | info@Vibsens.com | +90 2324000570 Address: Adalet mahallesi, Manas Bulvari, Folkart Towers No.30/3408 Bayrakli /izmir