Technical Specifications Summary for TSZ Series Components

This document provides detailed specifications for TSZ series components, focusing on load capacities, dimensions, and material hardness types.

1. Load Capacities and Types

• Two main material hardness types are specified:
  • Normal Compound (N): Hardness approximately 55° Shore (Sh)
  • High Sensitivity Compound (AS): Hardness approximately 43° Shore (Sh)
• Load capacities are given in decanewtons (daN) for different TSZ models and their corresponding ranges:

2. Dimensions

Dimensions are provided in millimeters (mm) for various parameters labeled A through J and diameters ØF, ØG, ØH. Key dimension values include:

• Parameter A: ranges from 232 mm to 430 mm depending on the model
• Parameter B: ranges from 235 mm to 394 mm
• Parameter C: ranges from 232 mm to 435 mm
• Diameters ØF, ØG, ØH vary between 20 mm and 46 mm

Additional dimension details include:

• M24, M36, M42 likely refer to thread sizes or mounting dimensions with values such as 18, 20, 22 mm and others.

3. Summary of Key Parameters

• Load (Carico): Specified per type and hardness compound
• Dimensions (Dimensioni): Critical for fitting and compatibility
• Material Hardness: Normal (55° Sh) vs High Sensitivity (43° Sh)

4. Recommendations and Usage Notes

Selection between Normal and High Sensitivity compounds should be based on required load capacity and sensitivity needs. Dimensional compatibility must be verified against installation requirements.

Note: The document appears to be a technical data sheet or catalog excerpt for TSZ series mechanical components, likely used in industrial applications requiring precise load and dimension specifications.