Technical Data Summary for GSA Series Components

This document provides detailed specifications for various types of GSA components, categorized by type, load capacity, and dimensions. The data is organized primarily into two categories based on the material hardness and sensitivity: Normal Compound (55° Shore hardness) and High Sensitivity Compound (45° Shore hardness).

1. Component Types and Load Capacities

• GSA 1 / AS 1: Load range 0 - 25 daN (Normal: 20 - 30 daN)
• GSA 2 / AS 2: Load range 25 - 50 daN (Normal: 50 - 80 daN)
• GSA 3 / AS 3: Load range 50 - 100 daN (Normal: 100 - 150 daN)
• GSA 4 / AS 4: Load range 100 - 150 daN (Normal: 150 - 275 daN)
• GSA 5 / AS 5: Load range 150 - 350 daN (Normal: 350 - 465 daN)
• GSA 6 / AS 6: Load range 350 - 600 daN (Normal: 465 - 1000 daN)

2. Dimensions

The components are specified with multiple dimensional parameters, including:

• A, B, C, D: Various length measurements in millimeters (mm)
• ØE, ØF, ØI: Diameter measurements in millimeters (mm)
• G, H: Additional dimensional parameters in millimeters (mm)

Specific values for these dimensions vary by component type and load rating.

3. Fastener Sizes

Recommended fastener sizes for assembly include:

• M6
• M8
• M10
• M12
• M16

4. Material Hardness and Sensitivity

• Normal Compound (N): Shore hardness 55° Sh, suitable for standard applications.
• High Sensitivity Compound (AS): Shore hardness 45° Sh, designed for applications requiring higher sensitivity.

5. Load and Application Notes

The load capacities are given in decanewtons (daN) and vary according to the compound type and component size. The high sensitivity compounds generally have lower load ratings compared to the normal compounds for the same component size.

Note: The document appears to be a technical specification sheet for GSA series components, likely used in mechanical or structural applications where load capacity and dimensional accuracy are critical.