*mydirectindustry

Catalogs
Vibrostop
Vibrostop G

Vibrostop G

Product catalog summary

Technical Specifications Summary

1. Load Capacity and Dimensions

The document provides detailed load capacities and corresponding dimensions for various types of components identified by codes such as G 1/AS, G 2/N, G 3/AS, etc. These components are categorized by load ranges measured in daN (decanewtons) and dimensions in millimeters (mm).

2. Material Hardness and Sensitivity Types

Two types of material hardness or sensitivity are specified:

Normal Compound (MESCOLA NORMALE) with a hardness of 60° Shore (Sh).
High Sensitivity Compound (MESCOLA ALTA SENSIBILITA') with a hardness of 45° Shore (Sh).

3. Component Types and Load Ranges

Each component type is listed with two load ranges, one for the normal compound and one for the high sensitivity compound. For example:

G 1/AS: 250 - 500 daN (Normal), G 1/N: 500 - 1,000 daN (High Sensitivity)
G 2/AS: 500 - 1,000 daN (Normal), G 2/N: 1,000 - 2,000 daN (High Sensitivity)

This pattern continues for higher load ranges up to 10,000 daN.

4. Dimensions (A, B, C)

For each component type and load range, three key dimensions are provided:

A: Varies between 1 mm and 395 mm depending on type and load.
B: Varies between 75 mm and 355 mm.
C: Two sets of values are given, either 41 mm or 92-97 mm, possibly indicating different design variants or series.

5. Additional Variants

The document also lists variants with the prefix "DS" (e.g., G 1/DS/AS), which appear to have similar load ranges and dimensions but differ in the 'C' dimension, which is consistently higher (92-97 mm) compared to the non-DS variants (41 mm).

Critical Information and Recommendations

Selection of component type should consider both load capacity and material hardness to match application sensitivity requirements.
Dimensions must be verified against installation constraints, especially the 'C' dimension which varies significantly between standard and DS variants.
Load ranges overlap between normal and high sensitivity compounds, indicating possible interchangeability depending on application needs.

Catalog excerpts

CARATTERISTICHE Features • Possibility di carico da 250 daN a 10000 daN per antivibrante. • Ingombro in altezza ridotto. • Piastra in alluminio a protezione dell'elastomero. • Looding up between 250 daN and 10000 daN each A.V. Mountings. • Low height. • Aluminium plate to shelter the elastomer. MATERIALI Materials APPLICAZIONI Applications INSTALLAZIONE Installation • Componenti in gomma: elastomero Vibrostop. • Componenti in metallo: lega di allumninio. • Presse - Magli - Cesoie - Macchine utensili - Torri evaporative - Gruppi di condizionamento. • Appoggio tra macchina e antivibrante. • Semplice appoggio a pavimento. • Rubber components: Vibrostop elastomer. • Metal components: aluminium alloy. • Presses - Hammers - Shears - Machine tool -Cooling towers - Air conditioning units. • Leaning between machine and A. V. mounting. • Simple leaning to the floor. VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008 Fax +39-02-4895.3807 - www.vibrostop.it

Open the catalog to page 1

PORTATA LOAD Dimensioni indicative Dimensions for reference only VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008 Fax +39-02-4895.3807 - www.vibrostop.it

Open the catalog to page 2

Diagrammi di carico Load diagrams VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008 Fax +39-02-4895.3807 - www.vibrostop.it

Open the catalog to page 3

Accessories G con piastra BPD G with BPD plate • Piastra BPD appoggiata o incollata per evitare il contatto metallico tra antivibrante e macchina. • The G/BPD is covered with Vibrostop BPD plate, which can be glued, and prevents the contact between the machinery and mountings metals. G con piastra acciaio G with steel plate • Piastra in acciaio con nicchia emisferica per I'appoggio degli eventuali carichi concentrati. • The steel plate presents a hemispheric niche where to insert the eventual puntual loads. VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008 Fax +39-02-4895.3807...

Open the catalog to page 4

CARATTERISTICHE Features • Possibility di carico da 250 daN a 10000 daN per antivibrante. • Basso valore della frequenza propria. • Piastra in alluminio a protezione deU'elastomero. • Laoding up between 250 daN and 10000 daN each A.V. Mountings. • Low natural frequency. • Aluminium plate to shelter the elastomer. MATERIALI Materials APPLICAZIONI Applications INSTALLAZIONE Installation • Componenti in gomma: elastomero Vibrostop. • Componenti in metallo: lega di allumninio. • Presse - Magli - Cesoie - Macchine utensili - Torri evaporative - Gruppi di condizionamento. • Appoggio tra macchina e...

Open the catalog to page 5

PORTATA LOAD Dimensioni indicative Dimensions for reference only VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008 Fax +39-02-4895.3807 - www.vibrostop.it

Open the catalog to page 6

Diagrammi di carico Load diagrams Performance characteristics for reference only VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008 Fax +39-02-4895.3807 - www.vibrostop.it

Open the catalog to page 7

Accessories G/DS con piastra BPD G/DS with BPD plate • Piastra BPD appoggiata o incollata per evitare il contatto metallico tra antivibrante e macchina. • The G/BPD is covered with Vibrostop BPD plate, which can be glued, and prevents the contact between the machinery and mountings metals. G/DS con piastra acciaio G/DS with steel plate • Piastra in acciaio con nicchia emisferica per I'appoggio degli eventuali carichi concentrati • The steel plate presents a hemispheric niche where to insert the eventual puntual loads. VIBROSTOP SRL - Via Savona, 97 - 20144 Milano, Italy - Tel. +39-02-4895.0008...

Open the catalog to page 8

All Vibrostop catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list