Document Overview: This technical document appears to present specifications related to load capacities and dimensions for different types of materials or components, categorized by hardness and sensitivity.

1. Load Capacity (Portata / Load)

The document distinguishes between two types of mixes or materials based on hardness and sensitivity:

• Normal Mix (Mesçola Normale / Normal): Hardness approximately 60° Shore (Sh)
• High Sensitivity Mix (Mesçola Alta Sensibilità / High Sensitivity): Hardness approximately 45° Shore (Sh)

Load values are given in decanewtons (daN) and are associated with different types or categories labeled as "AS" and "N".

2. Types and Load Ranges

Note: The exact meaning of "BPD" is not specified but appears to relate to load or capacity categories.

3. Dimensions

Dimensions are indicated with parameters "A" and "B" measured in millimeters (mm). Specific values are not provided in the excerpt but are critical for defining the size of the components or materials.

4. Summary of Key Parameters

• Hardness: 60° Shore for Normal mix, 45° Shore for High Sensitivity mix
• Load: Specified in daN, ranges from 1000 to 7000 depending on type
• Dimensions: Parameters A and B in mm (values not specified)

5. Recommendations and Usage

The document implies that selection between Normal and High Sensitivity mixes depends on the required hardness and load capacity. Proper dimensioning (A and B) is essential for application suitability.

Overall, this document provides a structured framework for selecting materials or components based on load capacity, hardness, and dimensions, emphasizing the importance of matching these parameters to application requirements.