Technical Data Summary for Mechanical Components

1. Overview
This document provides key specifications for various mechanical models, focusing on their elastic constants, load capacities, and dimensional parameters.

2. Specifications Table
The table lists multiple models identified by codes (e.g., A32, A20, A1, B1 80, B1 05, B55) with the following parameters:
- Elastic Constant (K): Measured in daN/mm, indicating the stiffness of the component.
- Load Capacity: Maximum load in daN that the component can withstand.
- Dimensions: Including parameters A, B, ØC, and ØD measured in millimeters (mm).

3. Key Parameter Values
- Elastic constants range approximately from 0.6 to 5.7 daN/mm.
- Load capacities vary between 20 daN and 105 daN.
- Dimensional values for A and B range from 1 mm to 80 mm.
- Diameter dimensions ØC and ØD are consistently 8.5 mm or 11 mm depending on the model.

4. Interpretation and Usage
The data suggests these components are designed for varying load requirements and stiffness, with specific dimensional constraints to fit mechanical assemblies. The consistent diameters imply standardized mounting or connection points.

5. Recommendations
When selecting a model, consider the required load capacity and stiffness (elastic constant) to ensure compatibility with the mechanical system. Verify dimensional parameters to guarantee proper fit.

This summary captures the essential technical parameters and their significance for practical application and selection of the mechanical components listed.