TR4101 Proximity Loop Powered Transmitter for Radial Shaft Vibration
3Pages

Proximity Transmitters and Seismic Vibration Transmitters TR4101 Proximity Loop Powered Transmitter for Radial Shaft Vibration The TR4101 is a cost-effective solution for monitoring the radial vibration on the shaft of balance of plant machines. The TR4101 combines the proximity probe driver and the signal conditioning circuit into one package. It works with a proximity probe and extension cable as a system. Features Loop powered transmitter Does not require proximity probe driver Buffered output/ GAP Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm) Aluminum cast case (copper free) with epoxy potting for better environmental protection and reliability Same size as a proximity probe driver Specifications Electrical Power Supply: 16-30VDC Frequency Response (±3dB): 2.0 - 3,000Hz Probe and Cable: 5 meter or 9 meter proximity probe and extension cable works with 5mm, 8mm, and 11mm probes Proximity probe includes: TM0180, TM0105, TM0110, 3300, 7200 and 990 series Sensor Linear Range (reference with AISI 4140 steel): 5mm, 8mm probe: 2.0 mm (80mil) Approximately 0.25mm (10mil) to 2.25mm (90mil) 11mm probe: 4.0mm (160mil) Approximately 0.4mm (15mil) to 4.4mm (175mil) Overall Vibration: 4-20mA 2-wire, load Buffered Output/ GAP: Original vibration, un-filtered Nominal: 2-18VDC Impedance: 20 kΩ Maximum cable distance: 3.0m (10ft) Sensitivity: 8.0mV/um (200mV/mil) nominal Electrical specifications continued Maximum Load: 50×(Vs-16) Where Vs is the system power supply Isolation: > 500Vrms; circuit to case

System OK: System OK: output 4-20mA System Not OK: output < 3.6mA Physical Height: 75mm (2.95”) Weight: 0.5 kg (1.0 lb) Environmental Temperature: Operation: -40℃ to +70℃ Storage: -40℃ to +100℃ GXX: Mount G00*: DIN rail mount G01: Plate mount SXX: Hazardous Area S00*: Without approval. CE S01: Multiple approvals ATEX: II 1 G Ex ia IIC T4 Ga Order Information * Factory default Standard configuration: KEMA06ATEX0217X IECEx: Ex ia IIC T4 Ga @Ta=-40℃ ~ +70℃ IECEx DEK 13.0020 X CSA: Non-incendive, Class I, Div. 2, Groups A, B, C&D T4 CSA: Intrinsically safe, Class I, Div. I, Groups A, B, C & D...

Proximity Transmitters and Seismic Vibration Transmitters Field-Wiring Diagram Data Acquisition 2-wire Vibration Transmitter POWER: Probe & Extension Cable 2-wire Vibration Transmitter POWER: Probe & Extension Cable Hazardous Area Safe Area Note: Other Barriers: TM0406: (STAHL 9160/13-11-10s) TM0407: (STAHL 9160/13-11-11)