Technical Specifications Summary

This document provides key technical parameters for a series of vibration equipment models labeled VEP600 through VEP6000. The data includes operational frequency, centrifugal force values, amplitude, mounting bracket type, weight, and air consumption.

1. Frequency and Centrifugal Force

• Frequency: Ranges from 8,500 to 17,000 vibrations per minute (Vib/mn), with most models operating around 15,000-17,000 Vib/mn except for VEP2500 and VEP4500 which operate at lower frequencies.
• Centrifugal Force: Two values are provided for each model: force out of concrete and force under load (in kilograms). Forces range from 710 Kg (VEP600) up to 6,250 Kg (VEP6000) out of concrete, and from 530 Kg to 5,280 Kg under load.

2. Amplitude

• Amplitude varies between 1.1 cm and 6.7 cm, indicating the vibration displacement range. The highest amplitude is observed in the VEP4500 model (6.7 cm), while the smallest is in VEP600 (1.1 cm).

3. Mounting and Weight

• Bracket Mount Fixing: Two types are specified: FRB2 for smaller models (VEP600 to VEP1400) and FRB4 for larger models (VEP2500 to VEP6000).
• Weight: The equipment weight ranges from 6.6 Kg (VEP600) to 17.0 Kg (VEP4500), reflecting the size and power of each model.

4. Air Consumption

• Air consumption rates vary from 870 liters per minute (VEP600) to 1,840 liters per minute (VEP6000), indicating the pneumatic power requirements for operation.

Critical Information and Recommendations

• Select the model based on required centrifugal force and amplitude for the specific application.
• Consider air consumption and weight for installation and operational cost planning.
• Ensure compatibility of bracket mount fixing type with the installation setup.