EZ Source General Catalog
44Pages

QUICK REFERENCE VIBRATOR CATALOG ator Guys.

DBA — NOISE — LIFE CURVE Turbine vibrators maintain 70-75 db’s throughout their entire life, as compared to sharp increases in noise levels of ball roller and piston type vibrators. Turbine sound levels actually reduce after a short “break-in” period and retain a constant low sound level throughout their life. Although ball and roller vibrators start at under OSHA limits, they quickly and steadily increase noise levels to well above OSHA, to beyond bearable range. (See curve.) This is caused by ball or roller jumping and accelerating each time it passes the air inlet, causing pitting and...

SILENT TURBINE VIBRATORS USE 50% LESS AIR THAN COMPARABLE PNEUMATIC BALL VIBRATORS AIR CONSUMPTION A ball vibrator draws up to over 50% more air than a turbine vibrator. The ball in a ball vibrator takes up only 1/20 of available space in the housing and the majority of the air pushing the ball around in the ballrace is wasted and exhausted without producing any work. In a turbine vibrator, the turbine fits snugly in the housing and only a very minimal amount of air can escape without producing any work. EFFICIENCY The turbine vibrator has a high level of efficiency throughout it’s life....

MODEL VS: BUILT-IN MUFFLER • Model VS Turbine Vibrators offer the feature of a • BUILT-IN-MUFFLER. Ideal for rough applications or • where moving machinery might damage external • accessories. Eight sizes with forces up to 900 lbs. Popular for air material-conveying systems, medium • size batch hoppers, etc. Available in both aluminum • and malleable castings. • • Built-In Muffler Totally Enclosed Continuous Duty Noiseless Maintenance Free Adjustable Speed Sturdy Cast Housings Heavy Duty Turbine Wheel TECHNICAL DATA Weight*** Model Data obtained on Laboratory test block. Frequency and force...

MODEL BVS: THREADED EXHAUST • Quiet, Meets OSHA As Low As 68 dB at 1 Meter • No Lubrication Required • Easily Repaired - One Moving Part • Patented Design • High Force Output • Outlasts Piston Vibrators 3 to 1 • Oversized Bearings VIBCO offers 10 models in the extra heavy duty BVS series. The use of non-lubricated air supply makes the BVS turbine vibrators perfect for applications in food and pharmaceutical (etc.) industries where oil exhaust would be objectionable. Exhaust port is threaded for piping off of air exhaust in closed, sanitized systems. Extra large amplitudes and wide range of...

MODEL MLT & MHI SANITARY TURBINE MODEL MLTSS & MHISS STAINLESS STEEL • IDEAL FOR SANITARY APPLICATIONS EVEN IN HARSH CHEMICAL ENVIRONMENTS • CONSTRUCTED OF 303 STAINLESS STEEL • MANY DIFFERENT SANITARY FINISHES AVAILABLE The NEW Millennium Line of Sanitary Pneumatic Turbine (MLT/MHI) Vibrators is your solution for all sterile/clean applications. The line consists of the MLT & MHI-130, -190, -250 and 320; all are designed for the most adverse applications. Their extruded aluminum housings, stainless steel shafts, and aircraft aluminum covers, give these vibrators additional strength,...

STAINLESS STEEL TECHNICAL HIGHLIGHTS AND MLT SERIES • Pressure range 30 to 80 PSI • Operating temp. max 250°F, 120°C • Decibel level as low as 68 dB on A-scale at 1 meter • Air consumption 50% less than comparable ball vibrators • Bearings are prelubricated for life TECHNICAL DATA WEIGHT * Vibrations per minute N = Centrifugal force in Newtons *** Test data are close to actual performance data of the unit on a typical application.The data obtained on a heavy laboratory test block cannot be duplicated on a typical application. We feel it is more important for the customer to measure the...

MODEL CC HEAVY DUTY • QUIET • MEETS OSHA STANDARDS • EASILY REPAIRED IN THE FIELD • PATENTED DESIGN The only unit on the market to offer high force and absolutely quiet operation. Six units available. They all work on the patented turbine principle. Compressed air drives a specially designed turbine wheel, allowing the air to be channeled through the unit, then exhausting through muffler pads, making them virtually noiseless. None of these units need lubrication, all are prelubricated for life. Oversized bearings give the units years of trouble-free service. MODEL CCW-5000 CCW-5000 the...

HEAVY DUTY SERIES Female Brackets Weight Model Data obtained on Laboratory test block. Frequency and force will decrease on less rigid mount. Note:Dimensions & data subject to change without notice. * Decibel from A-scale at 1 meter and 80 PSI. N = Centrifugal force in Newton. ** Rule of thumb for sizing “One lb. Vibrator Force”to each 10 lbs. of Bin Content”at 80 PSI. DIMENSIONS Model VSP-510 on burial vault forms

MODEL BBS & FBS BBS-100, 130, 160 and 190 - smallest of VIBCO turbine vibrators; with versatile mount and aluminum* housing. Never needs oil for continuous duty operation. The FBS-100, 130, 160 and 190 are designed especially as a match plate vibrator for the foundry industry. For fast start, high RPM and force and low noise with a built-in muffler. The match plate vibrators to be used only for intermittent duty. *Malleable casting available on special order. Weight*** Model For Match-Plates For Match-Plates For Match-Plates For Match-Plates Data obtained on Laboratory test block. Frequency...

Small SILENT Turbine mounted to automated parts alignment track. Helps keep parts moving freely. SILENT Turbines mounted on a track to consolidate pills in bottles while filling. SILENT Turbine mounted to a fly ash chute to keep ash flowing. Two SILENT Turbines on a bin with chemicals to help stop bridging. Two small SILENT Turbines mounted to cement hopper. Big SILENT Turbine on a table to insure full capacity packaging of 55 gallon drums.

Compressed air drives a hardened steel ball at high speeds around a highly finished and hardened steel race creating high frequency vibration.VIBCO BALL VIBRATORS require lubrication for long maintenance-free operation, start in any position. Mount VIBCO BALL VIBRATOR either directly to structure to be vibrated, or use simple mounting plates welded or bolted to the structure for better vibration transfer to a larger surface. MODEL BB The BB Series can be equipped with a muffler on the threaded exhaust port.The threaded exhaust also allows oily exhaust air to be piped away from the area of...