ATC/DME Test Set and ADS-B Target Generator The VIAVI ATC-5000NG is an RF signal generator/receiver for testing Mode 3/A, C and S transponders. The ATC-5000NG was designed with modern software defined radio technology and is the replacement product for the commercial functionality of the SDX-2000, ATC-1400A and S-1403DL. The ATC-5000NG is capable of performing most MOPS tests for DO-181E, DO-260, DO-260A, DO-260B, and DO-282B and is the ideal test equipment for engineering development, certification, manufacturing and service. • Transponders (Mode S/ADS-B Out) • 1090MHz DF18 Emitters (surface vehicles) • ADS-B In Ground Station Receivers • ADS-R, TIS-B Ground Station Transmitters Features • Target generation - independently configure up to 600 ADS-B, TIS-B, or ADS-R target types (32 dynamic and 568 static); ATCNGOPT03 Multireceiver option required • Software-driven design allows for field updates to add new features, capabilities or modifications • ADS-B squitter decode and logging for ADS-B Out testing (DO-260, DO-260A and DO-260B data parsing) • DO-260B MOPS preconfigured tests available (Option ATCNGOPT06) • Generates ATCRBS/Mode S interrogations • Multi-receiver test capability (ATCNGOPT03) • Pulse and frequency measurement • Remote controlled via GPIB or Ethernet • Two independent transmitters and receivers • TX/RX data logging capability • Legacy command set option • Full diversity testing capability • Data parsing in engineering units Benefits • Internal pulse measurement capability eliminates need for oscilloscope • Support for Air Traffic Control Modernization mandates (NextGen, SESAR) • Modern architecture design will support fut

VIAVI Solutions Contact Us +1 316 522 4981 © 2022 VIAVI Solutions Inc. [email protected] Product specifications and descriptions in this document are subject to change without notice. To reach the VIAVI office nearest you, visit Patented as described at viavisolutions.com/contact. viavisolutions.com/patents