PROGRAMMING GUIDE VIA Smart ETK SDK
36Pages

{{requestButtons}}

Catalog excerpts

PROGRAMMING GUIDE VIA Smart ETK SDK - 1

USER MANUAL Cost Efficient ARM based Fanless system

Open the catalog to page 1
PROGRAMMING GUIDE VIA Smart ETK SDK - 2

Copyright Copyright ©2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of VIA Technologies, Incorporated. Trademarks All trademarks are the property of their respective holders. Disclaimer No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no...

Open the catalog to page 2
PROGRAMMING GUIDE VIA Smart ETK SDK - 3

Battery Recycling and Disposal • Only use the appropriate battery specified for this product. • Do not re-use, recharge, or reheat an old battery. • Do not attempt to force open the battery. • Do not discard used batteries with regular trash. • Discard used batteries according to local regulations. Safety Precautions • Always read the safety instructions carefully. • Keep this User’s Manual for future reference. • All cautions and warnings on the equipment should be noted. • Keep this equipment away from humidity. • Lay this equipment on a reliable flat surface before setting it up. • Make...

Open the catalog to page 3
PROGRAMMING GUIDE VIA Smart ETK SDK - 4

ARTiGO A630 User Manual Box Contents • 1 x ARTiGO A630 system • 1 x AC-to-DC adapter • 1 x Power cord • 1 x Screw pack for miniPCIe module • 4 x Rubber feet pack Ordering Information Part Number Fanless embedded system with 1.0GHz VIA Cortex-A9 SoC, 1GB DDR3 RAM, 4GB eMMC, 2 x USB 2.0, 1 x Micro USB 2.0 OTG, 1 x HDMI, 1 x COM, 1 x DIO , 1 x 10/100Mpbs Ethernet, 1 x miniPCIe slot, 1 x Micro SD slot and 12V DC-in Optional Accessories Wireless Accessories Part Number EMIO-5531-00A1 VAB-820-W IEEE 802.11b/g/n USB Wi-Fi & Bluetooth module with assembly kit and antenna EMIO-2531-00A1 VAB-820-W-M...

Open the catalog to page 4
PROGRAMMING GUIDE VIA Smart ETK SDK - 5

ARTiGO A630 User Manual Table of Content 1. Product Overview 1 1.1 Key Features 1 1.1.1 ARM Based System 1 1.1.2 Optimized Integration with Multiple I/O Access 1 1.1.3 Networking Support 1 1.1.4 Embedded Operating System Ready 1 1.1.5 Storage Expansion 1 1.2 Product Specifications 2 1.3 Layout Diagram 5 1.4 Dimensions 6 HDMI® Port 7 USB 2.0 Port 7 Micro USB 2.0 OTG Port 8 DIO Port

Open the catalog to page 5
PROGRAMMING GUIDE VIA Smart ETK SDK - 6

ARTiGO A630 User Manual List of Figures Figure 1: Front panel I/O layout 5 Figure 2: Back panel I/O layout 5 Figure 3: Dimensions of ARTiGO A630 (Front view) 6 Figure 4: Dimensions of ARTiGO A630 (Right view) 6 Figure 5: HDMI port diagram 7 Figure 6: USB 2.0 port diagram 7 Figure 7: Micro USB 2.0 OTG port diagram 8 Figure 8: DIO port diagram 8 Figure 9: 10/100Mbps Ethernet port diagram 9 Figure 10: Audio jacks diagram 10 Figure 11: Micro SD card slot diagram 10 Figure 12: Power on/off button diagram 11 Figure 13: DC-in jack diagram 11 Figure 14: DC-in jack specification diagram

Open the catalog to page 6
PROGRAMMING GUIDE VIA Smart ETK SDK - 7

ARTiGO A630 User Manual List of Tables Table 1: Table 2: Table 3: Table 4: Table 5: Table 6: Table 7: Table 8: Table 9: Table 10: Table 11: Table 12: Table 13: Table 14: HDMI port pinouts 7 USB 2.0 port pinouts 7 Micro USB 2.0 OTG port pinouts 8 DIO port pinouts 8 10/100Mbps Ethernet port pinouts 9 10/100Mbps Ethernet port LED color definitions

Open the catalog to page 7
PROGRAMMING GUIDE VIA Smart ETK SDK - 8

ARTiGO A630 User Manual 1. Product Overview The VIA ARTiGO A630 is an ultra-compact and ultra-slim fanless embedded system measuring 154.40mm (H) x 27mm (H) x 106.68mm (D) that provides a flexible platform with I/O connectivity options, network features, and advanced software development tools for a wide range of interactive kiosks, signage, HMI, M2M applications and other advanced IoT. The ARTiGO A630 system is based on the VAB-630 SBC mainboard, powered by 1.0GHz WM8880 Cortex–A9 dual-core processor and completely compatible with Android and Linux operating system. The ARTiGO A630 comes...

Open the catalog to page 8
PROGRAMMING GUIDE VIA Smart ETK SDK - 9

ARTiGO A630 User Manual 1.2 Product Specifications Processor • 1.0GHz VIA Cortex-A9 dual-core SoC System Memory • 1GB DDR3 SDRAM onboard Storage • 4GB eMMC Flash memory • Micro SD Card Boot Loader • 512KB SPI Flash ROM Graphics • • • • Support Mali-400 SP GPU Two independent, integrated 3D/2D and video graphic processing units. Graphics engine supporting OpenGL® ES 2.0 hardware acceleration Supports MPEG-2 and H.264 video decoding up to 1080p LAN • ASIC AX88772CLF Audio • VIA VT1603A I2C Audio Codec HDMI • Integrated HDMI 1.4 transmitter USB • ASIC USB2514B-AEZC USB 2.0 hi-speed 4-port hub...

Open the catalog to page 9
PROGRAMMING GUIDE VIA Smart ETK SDK - 10

ARTiGO A630 User Manual Front Panel I/O • • • • • • • 1 x Micro USB 2.0 OTG port 1 x DIO port supprots 8 GPIO (4 GPI + 4 GPO) 1 x Micro SD card slot 2 x Audio jacks: Line-out and Mic-in 1 x Power LED 1 x Power button 2 x Antenna holes for 3G/Wi-Fi 1 x HDMI port 2 x USB 2.0 ports 1 x COM port for RS-232 (TX/RX) 1 x 10/100Mbps Ethernet port 1 x DC-in jack 2 x Antenna holes for 3G/Wi-Fi Onboard Connector • • • • 1 x USB 2.0 connector 1 x UART(Debug) connector 1 x miniPCIe slot 1 x SIM card slot Power Supply • 12V DC-in Operating System • Android 5.0, Linux Kernel 3.4.5 VIA Smart ETK • GPIO,...

Open the catalog to page 10
PROGRAMMING GUIDE VIA Smart ETK SDK - 11

ARTiGO A630 User Manual Vibration Loading During Operation • With onboard eMMC: 5Grms, IEC 60068-2-64, random, 5 ~ 500Hz, 1hr/axis Shock During Operation • With onboard eMMC: 50G, IEC 60068-2-27, half size, 11ms duration Mechanical Contruction • Metal top cover • Metal chassis housing Mounting • VESA Mount (75mm x 75mm) (No optional mounting kit will be provided by VIA) Dimensions • 154.40mm (W) x 27mm (H) x 106.68mm (D) (6.08” x 1.06” x 4.20”) Weight • 0.50kg (1.10lbs) Compliance • CE • FCC Notes: 1. As the operating temperature provided in the specifications is a result of the test...

Open the catalog to page 11
PROGRAMMING GUIDE VIA Smart ETK SDK - 12

ARTiGO A630 User Manual 1.3 Layout Diagram Antenna Hole Antenna Hole Mic-in Micro SD Card Slot Figure 1: Front panel I/O layout Antenna Hole Antenna Hole Figure 2: Back panel I/O layout

Open the catalog to page 12

All VIA Technologies catalogs and technical brochures

  1. COMe-9X90

    3 Pages

  2. EMIO-2550

    2 Pages

  3. AMOS-3005

    3 Pages

  4. AMOS-820

    3 Pages

  5. VIA_VTS-8589

    2 Pages

  6. VIA_SOM-6X50

    3 Pages

  7. VIA_QSM-8Q60

    3 Pages

  8. ALTA DS 4K

    2 Pages

  9. ARTiGO_A820

    2 Pages

  10. VIA_AMOS-825

    2 Pages

  11. EPIA-M920

    2 Pages

  12. ARTiGO A1300

    3 Pages

  13. VX900/H

    2 Pages

  14. VX11H

    2 Pages

  15. VIA C7®

    2 Pages

  16. VIA AMOS 800

    2 Pages

  17. VAB-1000

    2 Pages

  18. ARTiGO A900

    2 Pages

  19. VAB-820

    2 Pages

  20. VIPRO VP7910

    3 Pages

  21. VAB-800

    2 Pages

  22. VIA VX900

    2 Pages

  23. VIA Nano X2

    2 Pages

  24. VIA EPIA EN

    2 Pages

  25. VIA VB7001

    2 Pages

  26. VIA VB8001

    2 Pages

  27. VIA VB8004

    2 Pages

  28. VIA CN700

    2 Pages

  29. VIA CN896

    2 Pages

  30. VIA VX800

    2 Pages

  31. VX855

    2 Pages