PROTECT forks: brass or stainless steel Special demands require special solutions - in particular if it concerns of ex-proof and hygiene areas. High class workmanship, best materials and perfect diligence guarantee an optimum product. For this application, VETTER offers a wide range of QualityForks with either brass / stainless steel cladding or made of solid stainless steel. PROTECT claddings made of brass or stainless steel are designed as fixed cladding of fork blade and / or fork back. There is no cladding in the inner heel section (1) to allow for inspection of forks. Materials: brass (2.0321)...

PROTECT claddings for hygiene areas In the food or chemical industry, hygiene is of highest priority. QualityForks with stainless steel cladding are essential for this application! Stainless steel claddings offer an easy to clean, acid-resistance surface to meet highest hygiene requirements and guarantee effective protection against dirt and bacteria. Durability of cladding is significantly increased by a sheet thickness of 4 mm stainless steel. Smooth edgings guarantee that the transported goods will not be damaged. Important: The heel area of the basic fork is always accessible to allow the...

DuplEx - the best ex-proof QualityFork 1 mm inner cladding at the underside of fork 4 mm outer cladding of the complete fork blade Total cladding thickness: Approx. 12 mm Picture shows set-up of cladding materials According to EN 1755 forks in ex-proof areas need to be renewed as soon as cladding is reduced to minimum 1 mm thick. As wear limit could not be determined visibly until now, regular resp. daily measurement became necessary. However, these examinations are time-consuming and require special tools and expertise. This is the essential benefit of DuplEx claddings. The fork is cladded using...

When it comes to QualityForks, then VETTER. Globally present, no. 1 in Europe. With 50 years experience of fork production. From 1 to 120 tons load capacity and beyond, all designs and batch sizes – VETTER offers to you the complete product range “made in Germany”. More than 28,000 active articles offer the optimal solution for your application. Parts not yet existing will be developed for you. Beyond all international engineering and manufacturing standards VETTER QualityForks meet with the highest requirements in terms of manufacturing quality, accuracy of fit, metallurgy, welding quality and...