Pneumatic industry products
16Pages

Industrial Pneumatics. Pneumatic Products Product catalogue

Contents Special constructions Special constructions Page 3 Page 4 Page 8 Page 10 Page 13 Industrial Bags 8 bar/116 psi Industrial Bags 8 bar/116 psi - IKV and V series Industrial Bags 6 bar/87 psi Industrial Bags 6 bar/87 psi - IK series Accessories - Inflation of the bags Accessories - Inflation of the bags Vetter resistance charts Temperature resistance limits, material- and resistance charts

Special constructions VETTER - Always one idea ahead! > different materials > precise regulation without stepping > many sizes and shapes possible > numerous application areas It is precisely in the industrial sector that you will often find tool applications especially tailored to individual requirements. In this respect such aspects as flexibility and versatility are in the forefront. Pneumatic constructions are developed and produced in cooperation with the customer. The customer has numerous possibilities available with respect to material, operating pressure, size, shape, inflation...

Industrial Bags 8bai7116psi - IKV and V series Noiseless and bump-free tools. > Type marking = lifting power > Positioning accurate within millimetres > Inflation with water possible Vetter industrial lifting bags 8 bar (116 psi) are characterized by their noiseless, bump-free and smooth lifting of the most heavy loads. They lift, press, compress, brace and cleave - even in angled positions. The surface profile improves the gripping capability on slippery ground such as grass, sand etc. They have a multi-layer construction which widely extends over both sides of the bag. This is made of...

Accessories you will find from page 10. Industrial bags belonging to the IKV series have been especially developed for applications having high frequency rates, e.g.: > Securing devices in presses or other types of machines > Regular pressing or lifting of loads > Shape ejection out of production lines. Industrial bags belonging to the V series are best suited for temporary operations, e.g.: > Assembly and maintenance work on machines and other types of equipment > Conversion and adjustment of heavy loads. Technical data Industrial Bags Lifting power to/US tons Weight, approx. Burst...

In order to use the maximum lifting power, the total effective area, i.e. total area minus the edge zone, must be completely positioned underneath the load to be lifted and the bag must be inflated to the maximum permissible operating pressure. Selection of the industrial lifting bag depends on the weight of the load to be lifted as well as the lifting path This means that the industrial lifting bag develops the greatest lifting power at the beginning of the lift path and the greatest possible lifting height in the unloaded state This results in the fact that the lift path reduces with...

Accessories you will find from page 10. Cleave of a trunk Creating intermediate space Assembly of wind energy installations Train lifting Assembling aid for adjustment of the elements Industrial Bags 8 bar (116 psi) Lifting of trucks 7

Industrial Bags 6bai787psi - IK series Tools which are tailored to your requirements. > high lifting power + quality standard > Connection of up to 3 bags possible > Extremely wear-proof and slip-proof > Centre valve connection (either 1/4" or 1/2") Industry requires tools which are tailored to requirements. The industrial bags 6 bar (87 psi) are used in industrial production, e.g.: With respect to these factors they are characterized by their lifting power, high quality standard and their excellent adaptation capability. As a standard, the industrial bags are supplied with a surface...

Accessories you will find from page 10. Technical data Industrial Bags Lifting power Lifting height, max. to/US tons cm/inch Weight, approx. with smooth surface 2.2 cm/0.87 inch All data applies to the fixed built-in condition! Standard insertion height* of

Accessories - Inflation of the bags . Fitting control

Inflation with cylinder Dual connector, for simultaneous attachment of 2 compressed air cylinders, thread 5/8"" Inflation with alternative air source* Air-supply hose, green 10 m (32 ft.), with shut-off valve Commercially available hand and foot pump Truck tyre valve For every air source other than the compressed air cylinder, you need one of the two green air-supply hoses.

Accessories - Inflation of the bags Truck brake line Truck compressed air connector, 2 way Adapter for construction-site compressor Adapter set for all compressed air sources Stationary compressed air network Adapter for stationary compressed air network "* Note: If the outlet pressure of the compressed air network exceeds the allowed inflation pressure of the controller, then the adapter must be replaced with the pre-pressure regulator.

Vetter resistance charts Transparency for your safety. Since your products have to withstand thermal as well as chemical requirements, Vetter gives you detailed resistance information. Resistance charts Description of material CR NR EPDM The data is based on laboratory tests, experience and are Aceton o + – influenced by such factors as temperature, intensity, length of Acetylene + + – Alum, watery + + – Aluminium chloride exposure etc. + + + n. d. These symbols indicate degrees of resistance: Anilene – n. d. ASTM–oil 1 o – – + resistant Petrol o – n. d. – not-resistant o n. d....

A part of the IDEX Corporation. Vetter GmbH is part of the international IDEX Corporation. This corporation invests in successful medium-sized companies in highly specialised markets. All members of the group have two things in common: strong technical orientation and innovative strength. As our customer, you will benefit twice: on the one hand from our international practical knowledge and on the other hand from the intensive transfer of skills and know-how within the corporate group. This know-how contributes directly to the development of sophisticated and high-performing products.