Catalog excerpts
Emergency Pneumatics. Operating Instructions VETTER Safety Cushion SP 60 Type Safety Cushion SP 60 based on DIN 14151, Part 3 Art. No. 9987038801 | © Vetter GmbH I 05/17 I Changes and errors excepted.
Open the catalog to page 1Vetter Safety Cushion SP 60 Contents 1. EC Conformity declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Description of product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Correct use according to instructions. . . . . . . . . . . . . . . . . . . . . . . . 5 Technical data for safety cushion. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Technical data for blowers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ambient conditions and limits . . . . . . . . . . . . ....
Open the catalog to page 21. EC Conformity declarationEC Conformity declaration for Ramfan blowers In respect of the following Directives: Council of European Communities Directives 89/392/EEC as amended by 91/368/EEC, 93/44/EEC, 93/68/EEC (Machinery Directive), and Directive 2006/42/EC Also the following European Directives for our Electric Fans 73/23/EEC (Low Voltage Directive) Standard(s) to which conformity is declared: EN 294 (Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Upper Limbs) EN 953 (Safety of Machinery -Guards - General Requirements for the Design and Construction...
Open the catalog to page 3Das nachfolgend bezeichnete Material entspricht den europaischen harmonisierten Normen Anwendung fanden die Vorschriften der Richtlinie 2006/42/CE vom 17. Juni 2006. Elektrische Liifter: ESX230, Parkfan, Easy PowAir Technologie Liifter mit Verbrennungsmotoren: MT225, MT236, MT245, MT260, MT280, MT296 Easy Pov/Air Technologie Baujahr: Hersteller Eric Leroy Thierry Ohmium Telefax :06805/6006 10 small: infoPledifei arnuli.Ue www.leader nmbh rts>
Open the catalog to page 4EC Conformity declaration for safety cushions (available on request) in accordance with Directive 2006/42/EC Manufacturer name and address Vetter GmbH A Unit of IDEX Corporation Blatzheimer Str. 10 - 12 53909 Zülpich We hereby declare, that the Vetter Safety Cushion SP 60 (Rescue height 60 m/192 ft.) Type: SP 60 Serial No: _____________ Model: _____________ (see appliance plate, to be entered by customer) meets the following relevant provisions: Directive 2006/42/EC on Machinery Applied harmonised standards, references to which have been published in the Official Journal of the European...
Open the catalog to page 52. Description of product The self-aligning VETTER safety cushion SP 60 consists of a dual chamber system. It is also equipped with an innovative pressure regulation system. A minimum of 4 persons are required to assemble and disassemble it. The external covers are made of inflammable resistive and rot resistive material (according to DIN 4102 B1) and has a combination of welded and sown seams. The VETTER Safety Cushion SP 60 is produced according to the requirements specified in DIN 14 151, Part 3. 2.1 Correct use according to instructions The safety cushion is inflated by connecting and...
Open the catalog to page 6The serial number on the Type Label is coded as follows: For example: Serial number 07101234 Month: July1 Year: 20101 Consecutive number * month and year of production Note: Only Leader and Ramfan blowers are to be used which have been supplied by Vetter!
Open the catalog to page 7*Note: Only Leader and Ramfan blowers are to be used which have been supplied by Vetter! 2.4 Ambient conditions and limits The assembly location is mainly dependent on the operational situation and the local conditions. The assembly area should, as far as possible, be free of sharp objects or objects which could puncture. The safety cushion is to be protected against heat. 2.5 Safety instructions The main condition for reliable operation of the VETTER safety cushion is an exact knowledge and adherence to these operating instructions and safety information. In addition to this, it is...
Open the catalog to page 8Incorrect use or any unauthorized changes to the safety cushion make any manufacturer liability, with respect to any resulting damage, null and void. 3.1 Inspection for completeness An inspection is to be made before and after each operational period in order to check the components for completeness and to see if they are free of damage. The safety cushion is complete and can be erected without difficulty. Two permanent blowers are available and are in perfect condition. Turbine blade, cover and housing are free of damage. 1530019300 Leader blower (petrol) MT 236 H - - 2
Open the catalog to page 9Vetter Safety Cushion SP 60 Any other objects must not be placed on the safety cushion during transport or storage. Only store the safety cushion in a dry room when it is clean and in a dry condition. The life duration of the product can be shortened by being subjected to outside influences (e.g. heat from direct sunlight, temperature deviations etc.). Optimum storage temperature (min to max): -20 °C to +50 °C Safety measures before use Only extension cables or cable drums of suitable size for the corresponding current load are to be used (see „type label“). The cable should have a minimum...
Open the catalog to page 10Ramfan blowers The blowers are assembled onto the inflation hoses of the safety cushion via a snap-in connection. Lay the inflation hoses with the eyes over the pins and then tension the snap-in connection using the ratchet until the inflation hoses are fixed to the blower. Finally ensure that all 4 eyes lay on one pin thus ensuring stability. Make certain that the hoses are solidly connected to the blower! Leader blowers In order to use the Leader brand of blower it must be ensured that they are equipped with special adapters (contained in the delivery package of the blower). Place the...
Open the catalog to page 11Vetter Safety Cushion SP 60 Operating instructions Safe operation The safety cushion is to be erected so that only vertical jumps can be made. If possible, the person jumping should not jump into the cushion in the upright position but in the supine position. Never ask the person to be rescued to jump at an angle. After each jump it may be necessary to realign the safety cushion. The safety cushion must only be lifted and moved using the positioning loops. For safety and life duration reasons, any dragging across rough is to be avoided. Note! It is possible that the person to be rescued...
Open the catalog to page 12All Vetter GmbH catalogs and technical brochures
-
SP16/SP25
2 Pages
-
Universal tents
2 Pages
-
Safety cushion SP 60
2 Pages
-
Water tanks
2 Pages
-
Decon tent PZ 40 3 L
2 Pages
-
Leak sealing paste
2 Pages
-
Leak sealing bags
2 Pages
-
Decon shower
2 Pages
-
Mini lifting bags 116 psi
2 Pages
-
S.Tec lifting bags 174 psi
2 Pages
-
Universal gully sealing bags
2 Pages
-
Wedge lifting bags 14.5 psi
2 Pages
-
Rescue Products
70 Pages
-
Medical tents
21 Pages
-
Connectable Bags C.Tec 12
2 Pages
-
S.Tec 12 Lifting Bags
2 Pages
-
Aircraft Lifting Bags
6 Pages
-
Catalogue VETTER Industry
16 Pages
Archived catalogs
-
VETTER rescue products
74 Pages
-
Pipe Sealing Bags NBR
2 Pages
-
Catalogue Rescue Products
81 Pages
-
Pneumatic industry products
16 Pages
-
VETTER Safety Cushion
4 Pages
-
Vetter Pneumatic Tents
12 Pages