Industrial Pneumatics. Inspection, sealing & rehabilitation technology Product catalogue

Contents Round profile Mini-Pipe Sealing Bags Mini Test Sealing Bags Pipe Sealing Bags Test Sealing Bags Compressed air & water pressure testing - Round profile Bypass Bags Test system for domestic pipe network Pipe Sealing Bags CR Pipe Sealing Bags NBR High Pressure Pipe Sealing Bags 6 bar Egg Profile Sealing Bags Egg Profile Test and Bypass Bags Compressed air & water pressure testing - Egg profile Lateral packers Flexible packers Accessories - Compressed air & water pressure testing Accessories - Compressed air & water pressure testing Accessories - Inflation of the bags Accessories - Inflation...

Industrial Pneumatics. Variable, flexible, sealing. Vetter has been the leading supplier of industrial pneumatics for decades – and still is. We offer you a product range for demanding professionals, developed especially for you. As a result, Vetter products guarantee you maximum functionality and safety, even in extreme conditions. Count on it! Experience About 30 years of experience at the sewage market make Vetter a partner you can rely on. We apply our experience and expertise to the constant refinement of our products. Your benefit: Sophisticated industrial pneumatics help you to get everything...

ROUND PROFILE Mini Pipe Sealing Bags 2.5 bar (36.25 psi) The small flexible. extremely short design extremely expandable easy handling Mini pipe sealing bags are especially suited for sealing domestic pipe systems due to their short design. In addition to this they can be used when flexibility and curve mobility is required, e.g. in the heating and sanitary sector as well as with testing oil and petrol strainers according to DIN 1999 T 100. With rounded tips: Technical data Mini Pipe Pipe diameter Sealing Bags 2.5 bar/36.25 psi mm / inch Cylinder length Total length Weight, approx. litres / cu.ft....

Zubehöraccessoires,am Endeend of this chapterSeite 26. 28. For finden Sie see the dieses Kapitels ab from page Mini Test Sealing Bags 2.5 bar (36.25 psi) The small ones with duct. extremely short design extremely expandable optimised handling by valve connection Mini test sealing bags 2.5 bar can be used for testing, sealing and bypassing with repairs and maintenance work, e.g. sealing tests, channel inspection, maintenance, repair and cleaning. Technical Data Diameter Cylinder length Total length Weight, approx. litres / cu.ft. * including valve connection Standard test counter-pressure of 10...

ROUND PROFILE Pipe Sealing Bags The classics. wide product range very flexible due to the material only 3 sizes from 100 - 1,000 mm easy handling, because lightweight and short Vetter Pipe Sealing bags are the optimum solution when quick and reliable sealing of drainage is required. A big advantage of the sealing bags are their freely selectable contact pressure (on the pipe wall): from 0.5 bar to 2.5 bar/7.25 psi to 36.25 psi. The areas of operation are, among others: sealing off sewer pipelines during repair or maintenance work avoiding sewage backflow at the source location during pipe bursts,...

For accessoires, see the end of this chapter from page 28. Technical Data Pipe Sealing Bags Pipe diameter Diameter mm/inch mm/inch Test counter- Test counter- Test counter Note: As an oil-resistant alternative the Pipe Sealing Bags are also available as a CR-version and - new - as NBR-version. You will find those on page 18 + 19.

ROUND PROFILE Test Sealing Bags The inspectors. flexible and sturdy design only 3 sizes from 100 - 1,000 mm lighter than test bags with inside core Vetter Test Sealing Bags fulfil three functions in one: seal, test with water or air and reroute / divert. The flexible (internal hoses – no internal tube) and sturdy construction enable easy matching of the test bag to the different pipe materials. Small amounts of unevenness can also be compensated. The areas of operation are, among others: Rerouting drainage when leaking occurs Banking up and dosed diversion of liquids Sealing tests according to...

For accessoires, see the end of this chapter from page 28. Technical Data Pipe diameter Cylinder length Total length Weight. approx. litres / cu.ft. PDK 2.5 bar - Test counter-pressure 10 m WC (14.5 psi) PDK 1.5 bar - Test counter-pressure 5 m WC (7.25 psi) PDK 0.5 bar - Test counter-pressure 2 m WC (2.9 psi) Round profile Test Sealing Bags With 1 RDK and 1 PDK with 2 openings the compressed air testing as well as the water pressure testing can be carried out. No second PDK is necessary!

Compressed air testing - Round profile Sets 2.5 bar (36.25 psi) For pipes 70 - 1,000 mm (2.7 - 40 inch) PDK 7/15 FLEX with duct 1 x 1/2“ OT Compressed air adapter Comp. air adapter 1/2“ IT Comp. air adapter 1“ IT Accessories for inflation Inflation hose, 10 m (32 ft.), yellow Single fitting controller Additional accessories as an option Inflation and safety hose 10 m (32 ft.), yellow Measurement hose 10 m (32 ft.) (self-monitoring)

For accessories for the compressed air & water pressure testing , see the page 27. Compressed air adapter Comp. air adapter 2“ IT Accessories for inflation Inflation hose, 10 m (32 ft.), yellow Single fitting controller Inflation hose, 10 m (32 ft.), yellow Dual fitting controller Additional accessories as an option Inflation and safety hose 10 m (32 ft.), yellow Measurement hose 10 m (32 ft.) (self-monitoring) Compressed air & water pressure testing

Water pressure testing - Round profile Sets 2.5 bar (36.25 psi) For pipes 70 - 1,000 mm (2.7 - 40 inch) Accessories for inflation Inflation hose, 10 m (32 ft.), yellow Single fitting controller Additional accessories as an option D-Fixed coupling 1/2“ IT D-Fixed coupling 1“ IT C-Blind coupling with chain Ventilation float hose 1/2 Ventilation float hose 1 Ventilation float hose 2 Testing & measurement hose 1700013700 1700013200 Blocking valve Blocking valve Testing & measurement hose 1700008400 Size D D-Blind coupling with chain