Weight Transmitter and Indicator

Product catalog summary

Overview: The T1-L-RS485 is a weight transmitter and indicator designed for overload protection in hoist and crane applications. It features a 6-digit LED display and supports both 4 and 6 wire load cells.

Specifications:

Display: 6-digit LED with 8mm digit height.
Divisions Range: 0.2 μV/VSI, 10,000 for general use; 0.01 μV/VSI, 10,000 for internal use.
Analog Output: Opto-isolated 16-bit with multiple configurations (4-20mA, 0-20mA, 0-10V, etc.).
Power Supply: 12-24 VDC +/- 10%, 5W consumption.
Load Cells: Supports up to 8 load cells in parallel (350 ohm).
Linearity: <0.01% Full Scale for both general and analog output.
Thermal Drift: <0.0005% Full Scale/°C for general; <0.003% Full Scale/°C for analog output.
A/D Converter: 24-bit, 4.8 kHz.
Max Conversions: 300 conversions/sec (300Hz).
Display Range: -999999 to +999999.
Digital Filter: 0.012 - 7 sec; 5-300 Hz.
Logic Outputs: 3 relay outputs, max 115 VAC / 150mA.
Logic Inputs: 2 opto-isolated inputs, 5-24 VDC PNP.
Serial Port: RS485 with ASCII or Modbus RTU, baud rates from 2400 to 115200.
Environmental Conditions: Humidity up to 85% (condensate free), storage temperature -30°C to +80°C, working temperature -20°C to +60°C (CE-M approved: -10°C to +40°C).

Dimensions: 25 x 115 x 120 mm for DIN rail mounting.

Accessory Options: PSU-230-24 for use with 100-240VAC supply.

Contact Information: Nordtech-Vetec A/S, Teknikvej 69, DK-5260 Odense S, Denmark. Email: [email protected], Phone: +(00)45 6591 9802.

Catalog excerpts

Weight Transmitter and Indicator T1-L-RS485 • For overload protection on hoist, winches in lifting or crane applications. • 6 digit LED display. 8mm digit height. • Terminals for 4 or 6 wire load cell. • 3 individual cut oﬀ points. • For din rail mounting. Speciﬁcations Divisions range: Divisions range for internal use: Opto-isolated 16-bit analog output: Power supply and consumption: Number of Load Cells in parallel: Linearity and linearity of the analog output: <0.01% Full Scale; <0.01% Full Scale Thermal drift and thermal drift of the analog output: <0.0005 % Full Scale ; /°C ; <0.003% Full Scale /°C Max divisions (measure range: +/- 10mV =2mV/V): Measure range: Max Load Cell sensitivity: Display range: Decimals / Display increments: Digital ﬁlter / Conversion rate: Logic relay outputs: Logic inputs: Serial port: Baud rate: Humidity (condensate free): Storage temp.: Working temp.: Working temp.: (CE-M APPROVED): Weight transmitter analog / DIN rail Accessory options Nordtech-Vetec A/S - Teknikvej 69 - DK-5260 Odense S - Denmark - SE/CVR-no. 18175509 Mail: [email protected] - Phone: +

Open the catalog to page 1

Weight Transmitter and Indicator

Weight Transmitter and Indicator

Catalog excerpts

All Vetec A/S catalogs and technical brochures