1. Catalogs
  2. Vetec A/S
  3. Shear Beam Load Cell

Shear Beam Load Cell

Shear Beam Load Cell

Product catalog summary
Overview: The Nordtech-Vetec Shear Beam is designed for use in floor scales, vehicle-test lines, hopper scales, and other electronic weighing devices. It is known for its high accuracy and reliability, constructed from stainless steel and sealed to IP68 standards.
Specifications:
  • Output Sensitivity: Varies by model, with 2.0 ± 0.04 mV/V for OIML R60 C3 and C4, and 3.0 ± 0.08 mV/V for OIML R60 C5 and C6.
  • Maximum Capacity (Emax): Ranges from 0.5T to 10T depending on the model.
  • Load Cell Interval: Maximum number ranges from 3000 nLC to 6000 nLC.
  • Combined Error: Ranges from ≤± 0.0230 %FS to ≤± 0.0116 %FS.
  • Safe Overload: 150% of Emax.
  • Ultimate Overload: 300% of Emax.
  • Zero Balance: Less than ± 1.0% of FS.
  • Excitation Voltage: Recommended 5 to 12 V, maximum 18 V.
  • Input/Output Resistance: 350 ± 3.5 Ω.
  • Insulation Resistance: ≥ 5000 MΩ at 50VDC.
  • Temperature Range: Compensated from -10 to 40°C, operating from -35 to 65°C, and storage from -40 to 75°C.
Dimensions: The dimensions vary based on capacity, with specific measurements provided for capacities ranging from 0.5T to 10T.
Contact Information: Nordtech-Vetec A/S is located at Teknikvej 69, DK-5260 Odense S, Denmark. For inquiries, contact via email at [email protected] or phone at +(00)45 6591 9802.
See more

Catalog excerpts

Shear Beam Load Cell-1

Shear Beam SHEARBEAM • Suitable for floor scales, vehicle-test line, hopper scales and other electronic weighing devices. • Highly accurate and reliable. • Stainless steel construction. • Sealed to IP68. Maximum capacity (Emax): Max. Number of load cell interval: Ratio of min. LC verification interval: Combined Error: Minimum dead load: Safe overload: Ultimate overload: Zero balance: Excitation, recommended voltage: Excitation maximum: Input resistance: Output resistance: Insulation resistance: Compensated temp.: Operating temp.: Storage temp.: Nordtech-Vetec A/S - Teknikvej 69 - DK-5260 Odense S - Denmark - SE/CVR-no. 18175509 Mail: post@nordte

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.