Group: Load Cells for Hoists and Cranes
Catalog excerpts
#_ Vetec LOAD MONITORING • Combined load indication and load limitation system for hoisting devices, cranes and overhead cranes. • Designed according to customers specifications as direct replacement for load bearing pins in lifting equipment. • Provides the highest accuracy within weighing, ±0.1% FS accuracy. • Robust stainless steel construction. IP68. Specifications: Capacity: Proof load: Ultimate breaking load: Bridge resistance: Excitation: Output: Non-linearity: Non-repeatability: IP class: Operating temp.: Temp. Coefficient on Zero: Temp. Coefficient on Span: Signal cable: 0.1 to 1000T 150 % of rated load 500 % of rated load 350/700/1000 ohms 5 to 10 volts (dc) 1.0 to 1.5 mV/V ±1 % typical ±0.04 % optimum IP67 -20° to 70° C <0.02 % Capacity/°C <0.02 % Capacity/°C 5 mtrs. Polyurethane 4 core Complete systems: Load limitation LOADPIN + T1-L-485 Tensiometer + Amplifer Lload indication and limitation LOADPIN + P1001 / D1002 / D1004 Tensiometer + Display w. Amplifer Options: • Special anti-rotation / locking plates • Second redundancy gauge bridge • Internal signal amplifier • Single shear pins fully welded • Submersible • Internal greaseways plug / socket breakdown at pi Address Lucernemarken 18 A DK-5260 Odense S Bank Nykredit Bank Mail post@vetec.dk
Open the catalog to page 1All Vetec A/S catalogs and technical brochures
-
Running Line Tensiometer
1 Pages
-
Heavy Duty Tensiometer
1 Pages
-
Static Line Tensiometer
1 Pages
-
Bin Lift Cell
1 Pages
-
CHASSIS MOUNT CELL
1 Pages
-
ET Stainless Series
1 Pages
-
BELLOWSBEAM
1 Pages
-
SHEARBEAM
1 Pages
-
Amplifier
1 Pages
-
Crane Dynamometer
1 Pages
-
LOAD CELL DISPLAY
1 Pages
-
BIN LIFT LOAD CELL
1 Pages
-
LOAD CELL JUNCTION BOX
1 Pages
-
CHASSIS MOUNT LOAD CELL
1 Pages
-
COMPRESSION LOAD CELL
1 Pages
-
SHEAR BEAM LOAD CELL
1 Pages
-
S TYPE LOAD CELL
1 Pages
-
SHACKLE PIN
1 Pages
-
SILO LOAD CELLS
1 Pages
-
VETEC CATALOGUE
28 Pages
-
V-LINK Remote Display
1 Pages