Valves and solenoid valves series ISO 24563 SVP18 - SVE18
Valves and solenoid valves series ISO 24563 SVP18 - SVE18
- Constructed with high-quality materials for enhanced durability and performance.
- Complies with ISO 24563 standards for mounting interface dimensions and VDMA recommendations for subbase design.
- Operating pressure range: 2.5 to 9 bar for pneumatic valves, 0 to 9 bar for solenoid valves.
- Nominal air flow: 480 Nl/min for 5/2 valves, 390 Nl/min for 5/3 valves.
- Temperature range: Ambient -10°C to +50°C, Medium 0°C to +40°C.
- No lubrication required; uses filtered air as the medium.
- Common features for SVP18 and SVE18 include a nominal pilot pressure of 3 bar and a maximum frequency of 10 Hz.
- Electrical features for solenoid pilot SVE18 series are detailed on page B-44.
- Includes air flow diagrams and pilot pressure/inlet pressure diagrams for various valve configurations.
- Ordination codes for different voltage options are provided for solenoid valves.
- Details on assembling the ISO 18 manifold with necessary components and ordination codes.
- Valves come with fixing screws and seals; subbase fixing screws are not supplied.
- Manifold can be supplied preassembled upon request.
Catalog excerpts
212144315 SVP18 53 290 VALVES AND SOLENOID VALVES
Open the catalog to page 4
END PLATE INLET END PLATE BASE DI CHIUSURA > MIDDLE PLATE FOR SOLENOID VALVE MOUNTING BASE INTERMEDIA PER IL MONTAGGIO DI ELETTROVALVOLE > MIDDLE PLATE FOR PNEUMATIC AND SOLENOID VALVE MOUNTING BASE INTERMEDIA PER IL MONTAGGIO DI VALVOLE PNEUMATICHEED ELETTROPNEUMATICHE > ASSEMBLING KIT / KIT DI RICAMBIO - KM18 supplied with BMI 18 E and BTI18 P ,- Supplied separatly on demand. - Il kit KM18 viene fornitocon le basi BMI 18 E e BTI18 P ,- A richiesta pu essere fornitocome ricambio. >
Open the catalog to page 7
PLUG FLAT / CHIUSURA POSTO INUTILIZZATO > 49 = = Plug flat includes assembling screws. La piastrina di chiusura dei posti non utilizzati dellabase fornita con le relative viti di fissaggio. 18 12,5 3,1 4 Components needed to assemble the manifold in figure. Esempio di componenti necessari a realizzare la batteria raffigurata. > PositionQuantityOrdination code PosizioneQuantitCodice ordinazione > - KM 18 available as spare part separatly.-Le viti e le guarnizioni per il fissaggio vengono fornite con le valvole.-Il fissaggio alla base Ш a cura del cliente. -A richiesta,la base pu essere fornita...
Open the catalog to page 8All VESTA catalogs and technical brochures
MICROREGULATORS2 Pages
Atex Valves5 Pages
CZ Cartridge cylinders1 Page
Modular line M386 Pages
- Cylinder
- Direct-operated solenoid valve
- Pressure limiter
- Directional control valve
- Proximity switch
- Double-acting cylinder
- Single-stage pressure regulator
- Pneumatic cylinder
- Pneumatic gripper
- Membrane regulator
- Hydraulic directional control valve
- Single-acting cylinder
- Pneumatic directional control valve
- 2-jaw gripper
- Compact cylinder
- 3-way solenoid valve
- Multi-channel manifold
- Electric cylinder
- Stainless steel cylinder