Cut, grab, crimp and punch. Cutting direct gate molded impression molded Cuts large diameter sprues such as garment cases, helmets, pipe joint parts, trash cans, planters. Superb durability in long term use. transparent products Compact, lightweight body and with a large selection of blade items, easy mounting on chuck board and standby jig. Achieves efficient cuts matching cycle Pre-form cutting Various heated nippers prevent cracks and whitening, the decisive factor is the heating temperature of the blades and cutting speed. Supports demands for improved flexibility and high precision cutting....

Wire cutting with coil winding machine Attach to the nipper unit of automatic coil winding machine motors and ignition. Cutting thick diameter wires that cannot be By support for separate blades. allows punching and form cutting of aluminum sash and thin plates. recycling plants Cuts a variety of wires, copper tubing and steel bands in recycling plants refrigerators, washing machines, etc. Nippers for the purpose of pulling out the pachinko machine pins. molded products, punching slotted holes Punching blow molded products, punching slotted holes, for containers that cannot be punched and automobile...

Air Nippers For Resin Gate These are high-class air nippers that can be mounted on gate cutting equipment and standby jigs for accurate speedy cutting of resin products. VESSEL has a selection of items to meet a variety of needs, J6 around-the-clock operations to high cutting precision.

Slide-off air nipper horizontal-type GT-NY05/10/15/25 Slide-Off Air Nippers Horizontal-Type The horizontal slide enables space to be used effectively. The low profile of the main unit allows work to be removed without obstructing the operations of the chuck plate. • Hose nipple •Tube fitting Soft Plastic Hard Plastic Copper ^Blade length (K) and opening max. (H) is the dimension adjusted for standard blade (AJ type). 5Sf Air Pressure-•• 0.4~0.5 MPa ^Capacity(0) is for reference purpose only. It varies depending on blade types. Blade is optional. Note that forward and backward-facing blades are...

Slide-off air nipper horizontal-type GT-NY10S/25S Double Action Sliding Air Nippers Sliding direction Forward Reverse Spec. & Size of the Hose Port W/tube fitting Hose I.D. (J2.5XO.D. 04mm W/tube fitting Hose I.D. 04XO.D. 06mm Blade length (K) and opening max. (H) is the dimension adjusted for standard blade (AJ type). SSSAir Pressure—NY1 OS : 0.4—0.5 MPa/NY25S : 0.5—0.6 MPa ^Capacity(0) is for reference purpose only. It varies depending on blade types. These compact, lightweight nippers have been designed or easy mounting inside equipment and to enable secure mounting under high-density mounting...

Slide-off air nipper horizontal-type blades Straight blades for plastic AJ/ This is a vertical set of blades with an unbeveled cutting edge. You can apply it at a right angle to the gate. RAJ/ This is a reverse bevel of AJ type. AJB/ This has a brazed carbide tip, suitable for cutting hard plastic or plastic containing glass fiber

Slide-off air nipper horizontal-type blades I Lift blades for plastic AD/ This is used for batch processing of the three-dimensiona gate such as ride gate

Slide-off air nipper vertical-type GT-NT03/05/10/20 Slide-Off Air Nippers Vertical-type Blade gape is adjustable, and fine adjustments are easy to make after mounting the nippers, ensuring clean, unblemished cut surfaces. •Hose nipple *Tube fitting Soft Plastic Hard Plastic

Slide-off air nipper vertical-type blades Straight long blades for plastic AJL/ This is a long type set of straight blades. This is useful when there is distance between the nippers and the gate out portion of the

Slide-off air nipper vertical-type blades Lift blades for plastic AD/ This is used for batch processing of the three-dimensiona gate such as ride gate

These nippers are equipped with a foot switch and are linked to high precision drivers, enabling the cutting of film-shaped gates from the thin end, preventing wrinkles around the cut. 'Hose Coupling: I.D. <jA X O.D. ^6 mm 'Piston stroke---Max.12 mm Related items Adjusting Screw Connected between the compressor and the air nippers, the timing controller enables adjustments to the slide and cutting timing. (Approximately 0.5 seconds to 1.5 seconds) Connectable nippers (Reference) Connedable unit (Blade open/close) Size Height 46 X Length 80 X thickness 34 (mm) Weight - 275 g With tube joint: I.D....

GT-NKH20A/20AR Heat Air Nippers (Air Hydro Type) Air-hydro cylinders produce high power from air and oil. These units are ideal for high precision cuts required for products such as optical resin lenses. Cylinder protective cover / Speed control of cut speed and heater temperature allows for variable cutting surface solutions for extremely high precision cutting demands. Heater installation hole Sensor installation hole Bracket (Option) Heater installation hole /(mm) Temp Cycle Consumption P|Sf wff Acril (MAXt) (sec/cut) (cm3/str.) (mm' l9) ■ Included heater: 80W/120V Cord length: 300mm ■Included...

GT-NTH05/10 Heat Air Nippers (Vertical sliding type) One blade is fixed in position, facilitating easy gate alignment. In addition, a slide function presses the product into position. ■Included heater: 80W/120V Cord length: 300mm ■ Included temperature sensor : Thermal couple type K (Nickel-Chromium/Nickel-Aluminum) Cord length: 1,000mm Blades Specifications _ Special Alloy Steel Special Alloy Steel Nipper type (resin) 3.5 Nipper type (resin) 4.5 Cutting blade effective Weight HTH type blade weight does not include heater and sensor. Option Parts •Temperature controller (DTC-001) Temperature...

Servo Heat Nippers GT-NKHD20A/45 Servo Heat Nippers (With Motor Cylinder) Blade travel distance and speed can be easily programmed. Servo motor control enables delicate blade feeds and quiet gate cutting work. (Backward-facing blades) •Power supply •Heater code ■Parallel cable •Power cord •Sensor cord Small type for lens cutting (Forward-facing blades) (Backward-facing blades) •Power supply •Heater code ■Parallel cable •Power cord •Sensor cord Motor cylinder Cutting Capacity Blade Edge Cutting Blade Position Max. Max. Positioning Power Supply Current Weight Model No. 5* (mm) Temp. Cycle Opening...