Combiline lifeline system
Combiline lifeline system
- The system allows for horizontal, inclined, and vertical routing without needing to unhook, ensuring complete safety.
- It meets safety requirements for slopes greater than 15°.
- A specific carriage with uni or bi-directional blocking ensures user safety.
- Applicable in various areas such as inclined access, arched roofs, amusement parks, and pressure pipelines.
- Made of stainless steel, offering resistance to corrosion.
- The system is designed to meet safety requirements for slopes greater than 15° and can be used from 0° to 180°.
- For slopes from 0 to 60°, a lanyard is allowed (EN 355), while from 60 to 90°, direct connection to the harness is required.
- Moving Intermediate Piece: Allows the operator to work on both sides of the line.
- Fix Intermediate Piece: Enables the carriage to pass easily on both sides without unhooking.
- Pretensioner: Adjusts cable tension to 50kg and includes a fall indicator.
- Crimped Tensioner: Tensions the cable at its extremity, facilitating visual control.
- Manual Tensioner: Allows cable tensioning without specific tools.
- Energy Absorber: Reduces forces applied to the structure, fitted at the end of the lifeline.
- Cable: 8mm, 7x7 stainless steel cable with VERTIC Bolduc for better routing.
- Safety Panel: Installed at system access for identification and control.
- Crimped Articulated End Piece: Facilitates connection with extremity supports.
- Manual End Piece: Can be installed manually without tools.
- Angle Piece for Post: Adjustable on-site for angles up to 45°.
- 90° or 135° Angle Piece: Installable on a façade with support.
Catalog excerpts
INCLINED CABLE LIFELINE SYSTEM Crédit photo ARTIGIANATO DINAMICO PRODUCTS ADVANTAGES • Allows a horizontal, inclined and vertical routing in complete safety without unhooking from the system • Answers the safety requirements on slopes that are higher than 15° • A specific carriage with a uni or bi-directional blocking device allows to ensure the safety of the user • Wide range of application areas : inclined access, arched roofs, amusement parks, pressure pipe lines, ... • Resistance to corrosion : made of stainless steel
Open the catalog to page 1
The COMBILINE system allows meeting the safety requirements of slopes greated than 15°. Since all configurations are not exclusively horizontal or vertical, VERTIC has patented an anti-fall system that can be used from 0° to 180°. Crédit photo CRESTO Using the fall arrest lanyards : from 0 to 60° : lanyard allowed (EN 355) from 60 to 90° : no lanyard allowed, direct connection must be done to the harness. Reversible, travelling, locking carriage Travelling, locking carriage Permits working at a distance from the life line. It provides bidirectional anti-fall locking. Can be connected at any point...
Open the catalog to page 2All VERTIC catalogs and technical brochures
Crinoline ladders2 Pages
folding-guardrail2 Pages
Vertirail fall arrest system2 Pages
Free-standing guardrail2 Pages
Guardrail on parapet2 Pages
VERTIC general brochure48 Pages
Guardrail on steel deck2 Pages
Combirail2 Pages
