MultiGrip Vise Sliding Cover Dovetail Interface Moving Side mates with MultiGrip Jaws Serration Interface mates with MultiGrip Jaws (Sides and center of top surface) Dovetail Interface, Fixed Side Mates with MultiGrip Jaws 1/8 NPT Guide Shaft Breather Port (Front and Back) Vise Cover (Front and Back) Grease Zerk on Front Vise Sensor hole (M8x1.0) on Back 1/8 NPT Vise Closed Port (Front and Back) Quick-Change Workholding M8x1.25 tapped holes and M8 Dowel Pin holes on bottom side 1/8 NPT Vise Open Port (Front and Back) Automation Ready

MultiGrip 2000 MultiGrip 4000 www.versabuilt.com [email protected] Boise, Idaho USA Clamping force shown in the table above is the arithmetic sum of the individual forces, per industry norms (equivalent to Schunk KSP100-LH or OMIL CFP 100 Expected gauge force, if clamping on a force gauge, will be 'A of the clamping force 1when measuring, introduce vibration to simulate machining