1/2” Bolted Metal – ATEX with Metal Center Section SPECIFICATIONS & PERFORMANCE Flow Rate Adjustable to . . 0-12 gpm (45.4 lpm) Port Size Suction . . . . . . . . . . . . . . . . 1/2” NPT Discharge . . . . . . . . . . . . . . 1/2” NPT Air Inlet . . . . . . . . . . . . . . . . . 3/8” NPT Air Exhaust . . . . . . . . . . . . . 3/8” NPT Suction Lift Dry . . . . . . . . . . . . . . . . . 13’ (3.9 m) Wet . . . . . . . . . . . . . . . . . 22’ (6.7 m) Max Solid Size (Diameter) . . . . . . . . . . . . . . . . . 1/16” (1.6 mm) Max Noise Level . . . . . . . . . 84 dB(A) Shipping Weights Aluminum . . . . . . . . . . 11 lbs (3.9 kg) Stainless . . . . . . . . . 17 lbs (7.7 kg) Alloy C . . . . . . . . . . . 17 lbs (7.7 kg) AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI 6 10 4 8 12 Capacity in U.S. Gallons Per Minute 10 NOTE: Performance based on the following: elastomeric fitted pump, flooded suction, water at ambient conditions. The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%. 1/2" NPT 1/2" NPT 1/2" NPT DISCHARGE PORT DISCHARGE PORT DISCHARGE PORT 3/8" NPT AIR INLET 3/8 " NPT 3/8 " NPT 3/8 " NPT EXHAUST PORT EXHAUST PORT EXHAUST PORT .95 24.13 1/2" NPT 1/2" NPT 1/2" NPT SUCTION PORT SUCTION PORT SUCTION PORT BOTTOMBOTTOM VIEW VIEW BOTTOM VIEW Warren Rupp, Inc. | A Unit of IDEX Corporation 800 North Main Street | Mansfield, OH 44902 USA Phone: 419.526.7296 | Fax: 419.526.7289 ©Copyright 2019 Warren Rupp, Inc. All