1. Catalogs
  2. Vermop Salmon GmbH
  3. DOSING SYSTEM 4-WAY PROMAX

DOSING SYSTEM 4-WAY PROMAX

DOSING SYSTEM 4-WAY PROMAX

DOSING SYSTEM 4-WAY PROMAX

Product catalog summary
Product Information
The document provides details about the 4-way dosing system, specifically the ProMax model with a flow rate of 14 L per minute. It includes important notes on maintenance, such as closing the water supply after use and regularly cleaning the system. The system is designed for use with up to four chemical products, offering precise mixing ratios to save time and resources while enhancing user safety by minimizing exposure to concentrated chemicals.
Technical Specifications
The housing is made of PP, with a pressure range of 2 to 9 bar. The dimensions are 220 x 100 x 120 mm, and it weighs approximately 900 g. The document also provides a color-coded measuring tip guide for different dilution ratios, which are intended as a guide and may require on-site calibration due to varying factors like water pressure and product viscosity.
Conversion and Application
Instructions are provided for converting the system to use a 5 L bag, including cutting the suction hose and connecting it with a non-return valve. The system can be used for ready-to-use solutions, buckets, and cleaning machines, and allows for installation with multiple units.
Dosing Information
The leaflet includes a dilution table for the ProMax dosing system, with standard measuring tips for different flow models. The dilution ratios were determined at a pressure of 2.8 bar and a flow rate of 20 L/min, and are subject to change based on site-specific conditions.
See more

Catalog excerpts

DOSING SYSTEM 4-WAY PROMAX-1

PRODUCT INFORMATION DOSING SYSTEM 4-WAY PROMAX 4-way dosing system; Code 17342140 / 14 L per min. osing system can be used with up to 4 chemical products D aves time and money thanks to precisely adjustable mixing ratios S specially sustainable thanks to careful handling of resources E nhanced user safety since there is no exposure to concentrated chemicals E asy to use E nstallation of the dosing unit possible with multiple units I Application and area of use Technical data Housing: PP Flow rate: 14 L / min Pressure range: 2 – 9 bar Dimensions (H x W x D): 220 x 100 x 120 mm Weight: approx. 900 g Subject to modifications. The general terms and conditions of sale of VERMOP Salmon GmbH apply. Version: May 2021 Ready-to-use solution B ucket Cleaning machines Dosing information Measuring tip colour Product / Recommendation VermoFloor VermoTop VermoSan VermoZero And many more For further, detailed information on measuring tips and the corresponding dosages, see the leaflet "Dilution table - ProMax dosing system" The dilution ratios specified are intended only as a guide. Varying factors such as the water flow / pressure, the distance of the product container from the inlet fitting and the viscosity of the product often require adaptations on site (possibly calibration). C ut the suction hose (1) to the desired length up to the 5 L bag. A t the lower end of the suction hose (1), connect the small non-return valve (2) (arrow direction / flow direction to the unit) with the silicone tube. I nsert the silicone tube (3) into the opened bag. Important notes / maintenance of the dosing system P lease always close the water supply / water tap completely after use. C lean the dosing system regularly. T he tubes should be flushed with warm / hot water (maximum water temperature 70 °C). For further information on the dosing unit, please refer to the operating instructions. The information corresponds to our experience and knowledge. No liability or corresponding claims can be derived from this. VERMOP Salmon GmbH, Zeppelinstr. 24, D-82205 Gilching, Tel: +49 8105 77889-0,

 Open the catalog to page 1
DOSING SYSTEM 4-WAY PROMAX-2

DOSING SYSTEM PROMAX Dilution table Light brown Standard measuring tips Subject to modifications. The general terms and conditions of sale of VERMOP Salmon GmbH apply. Version: May 2021 without hole without hole Important information Note: the indicated dilution ratios were determined at a pressure of 2.8 bar and a flow rate of 20 L / min. The dilution ratios specified are intended only as a guide. Varying factors such as the water pressure, the distance of the product container from the inlet fitting and the viscosity of the product often require adaptations on site (possibly calibration). For...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.