1. Catalogs
  2. Vermop Salmon GmbH
  3. DOSING SYSTEM 14L PROMAX

DOSING SYSTEM 14L PROMAX

DOSING SYSTEM 14L PROMAX

DOSING SYSTEM 14L PROMAX

Product catalog summary
Product Information
The document provides details about the VERMOP Salmon GmbH's DOSING SYSTEM 14L PROMAX. It includes specifications, maintenance instructions, and application guidelines.

Specifications
  • Flow rate: 14 L/min
  • Pressure range: 1.5 – 9 bar
  • Dimensions: 220 x 100 x 120 mm
  • Weight: approx. 900 g

Maintenance Instructions
  • Always close the water supply after use.
  • Regularly clean the dosing system.
  • Flush tubes with warm/hot water (max 70°C).

Conversion to 5 L Bag
  • Cut the suction hose to the desired length.
  • Connect the non-return valve with the silicone tube.
  • Insert the silicone tube into the opened bag.

Application and Use
  • Suitable for one chemical product.
  • Time and cost-efficient with adjustable mixing ratios.
  • Enhanced user safety with no exposure to concentrated chemicals.
  • Installation possible with multiple units.

Dosing Information
  • Standard measuring tips are provided with varying dilution ratios based on the model (4 L/min and 14 L/min).
  • Factors such as water pressure and product viscosity may require on-site adaptations.

Important Notes
  • The dilution ratios are guides and may need calibration.
  • No liability is assumed for the information provided.
See more

Catalog excerpts

DOSING SYSTEM 14L PROMAX-1

PRODUCT INFORMATION DOSING SYSTEM 14L PROMAX Code 17342120 / 14 L per min. uitable for one chemical product S aves time and money thanks to precisely adjustable mixing ratios S specially sustainable thanks to careful handling of resources E nhanced user safety since there is no exposure to concentrated chemicals E asy to use E nstallation of the dosing unit possible with multiple units I Application and area of use Technical data Housing: PP Flow rate: 14 L / min Pressure range: 1.5 – 9 bar Dimensions (H x W x D): 220 x 100 x 120 mm Weight: approx. 900 g Subject to modifications. The general terms and conditions of sale of VERMOP Salmon GmbH apply. Version: May 2021 Ready-to-use solution B ucket Cleaning machines Dosing information Measuring tip colour Product / Recommendation VermoFloor VermoTop VermoSan VermoZero And many more For further, detailed information on measuring tips and the corresponding dosages, see the leaflet "Dilution table - ProMax dosing system" The dilution ratios specified are intended only as a guide. Varying factors such as the water flow / pressure, the distance of the product container from the inlet fitting and the viscosity of the product often require adaptations on site (possibly calibration). C ut the suction hose (1) to the desired length up to the 5 L bag. A t the lower end of the suction hose (1), connect the small non-return valve (2) (arrow direction / flow direction to the unit) with the silicone tube. I nsert the silicone tube (3) into the opened bag. Important notes / maintenance of the dosing system P lease always close the water supply / water tap completely after use. C lean the dosing system regularly. T he tubes should be flushed with warm / hot water (maximum water temperature 70 °C). For further information on the dosing unit, please refer to the operating instructions. The information corresponds to our experience and knowledge. No liability or corresponding claims can be derived from this. VERMOP Salmon GmbH, Zeppelinstr. 24, D-82205 Gilching, Tel: +49 8105 77889-0,

 Open the catalog to page 1
DOSING SYSTEM 14L PROMAX-2

DOSING SYSTEM PROMAX Dilution table Light brown Standard measuring tips Subject to modifications. The general terms and conditions of sale of VERMOP Salmon GmbH apply. Version: May 2021 without hole without hole Important information Note: the indicated dilution ratios were determined at a pressure of 2.8 bar and a flow rate of 20 L / min. The dilution ratios specified are intended only as a guide. Varying factors such as the water pressure, the distance of the product container from the inlet fitting and the viscosity of the product often require adaptations on site (possibly calibration). For...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.