HORIZONTAL DIRECTIONAL DRILL BUILDING ON GREATNESS. Incorporating dependability and performance the D40x55 S3 Navigator® horizontal directional drill with the latest advancements in dual rod technology create a familiar operator experience that will outperform many other rock drilling solutions. REDUCED STEPS. The time and steps required to add or remove a rod on the D40x55DR S3 is significantly less than previous Vermeer models due to an enhanced dual drill rod design that quickly and easily makes up the inner and outer rod connections. ADDED COMFORT. Install with added comfort of climate control, weatherproofing and reduced noise levels of 80 dBA at the operator’s ear in a standard operator’s cab. IMPRESSIVE POWER. Powered by a 140 hp MORE FEET ONBOARD. Install more feet and LESS RESTRICTIONS. A hollow inner rod design (104 kW) John Deere diesel engine, this drill serves up 40,000 lb (177.9 kN) of thrust/pullback and 5,500 ft-lb (7,457 Nm) of rotational torque. save time with an impressive 500' (152.4 m) of drill rod on-board. results in more air and drilling fluid flow to the drill head on pilot bores and the hole opener during pullback, providing contractors the ability to select from a more diverse range of tooling options, including air hammers and larger hole openers.

DRILLING FLUID SYSTEM ONE Max flow: 70 gpm (264.6 lpm) Max pressure: 900 psi (60.2 bar) FEATURES Breakout system: Sliding, open top vise Drilling lights: Standard Flow indicator: Mud flow indicator Stakedown system: Standard/Aggressive Cab: Standard Strike alert: Standard Remote lockout: Standard ENGINE OPTION TWO Make and model: John Deere Fuel type: Diesel Max engine rpm: 2400 rpm Gross horsepower: 140 hp (104 kW) GENERAL WEIGHTS AND DIMENSIONS Min transport length: 256" (650 cm) Max operational length: 296" (752 cm) Min transport width: 89" (226 cm) Max opertaional width: 120" (305 cm) Min...