Catalog excerpts

BC900XL - 1

BRUSH CHIPPER OPERATOR SAFETY. Combined with the patented bottom feed stop bar is the 4-position upper feed control bar with dual stop positions and forward/reverse feed positions. Mounted over the feed table, it enables the operator to stop the feed rollers and select forward or reverse operations. Dual reset/hold-to-run buttons allow the operator to readily reset the bottom feed stop bar. SMARTFEED. This patented feed system helps LARGE RECTANGULAR FEED OPENING. CLUTCHLESS PTO. The throttle integrated with The large 9 in x 14 in (22.9 cm x 35.6 cm) feed opening helps boost productivity by reducing the need to trim heavily branched material before feeding it into the chipper. the belt drive engagement process helps ensure that the PTO can only be engaged while the engine is at low idle/low rpm. Automatically, the engine throttles up to full rpm after the belt drive is fully engaged. This system helps to reduce premature wear to the belt drive system by preventing high idle engagement of the cutter drum. increase operator productivity while reducing strain on vital engine parts. The feed-sensing control system monitors engine rpm and automatically stops and reverses the feed roller when feeding larger hardwood material. 35 HP (26 kW) GAS ENGINE. The BC900XL is equipped with a Briggs & Stratton Vanguard gas engine, providing high torque in a compact and lightweight size to process branches and material up to 9 in (22.9 cm) in diameter. EASE OF SERVICE. This machine offers direct access to all parts of the chipper for routine maintenance without having to climb on or remove any shields. A dripless oil filter and five grease points are provided to reduce work effort and speed up service time

Open the catalog to page 1
BC900XL - 2

BC900XL BRUSH CHIPPER GENERAL CUTTING SYSTEM Length (feed table up): 140.4 in (356.6 cm) Disc dimensions: Thickness of 1 in (2.5 cm) and 33 in (83.8 cm) diameter Length (feed table down): 154.8 in (393.2 cm) Width: 79.5 in (201.9 cm) Height: 97 in (246.3 cm) Weight: 3,060 lb (1,387.9 kg) ENGINE Make/Model: Briggs & Stratton Vanguard Gross horsepower: 35 hp (26 kW) Max torque: 53 ft-lb (71.9 Nm) Fuel type: Gasoline Number of cylinders: 2 Cooling medium: Air FEED SYSTEM Max chipping capacity: 9 in (22.9 cm) Infeed opening height: 29 in (73.6 cm) Infeed table width: 48 in (121.9 cm) Feed...

Open the catalog to page 2

All Vermeer Manufacturing catalogs and technical brochures

  1. AX19

    2 Pages

  2. S925TX

    2 Pages

  3. CTX100

    2 Pages

  4. D60x90 S3

    2 Pages

  5. D24x40 S3

    2 Pages

  6. D40x55 S3

    2 Pages

  7. D23x30 S3

    2 Pages

  8. WC2300XL

    2 Pages

  9. TG7000

    8 Pages

  10. TG5000

    6 Pages

Archived catalogs

  1. Quick Clip

    2 Pages