video corpo

OFFSHORE
20Pages

{{requestButtons}}

Catalog excerpts

OFFSHORE - 1

Range of high performance lifting material for Offshore

Open the catalog to page 1
OFFSHORE - 2

Each product bearing the VERLINDE brand is the outcome of production facilities that are constantly improved and adapted to cutting-edge design technigues. The materials and components used for the manufacture of our products are subjected to the most stringent checks. At its various production plants, VERLINDE mass produces wire rope, chain, belt electric winches, together with travelling crane components. Sales agents well-acquainted with hoisting technigues analyse the problems set by each installation project (10 agencies in France and other agencies and commercial operations in over 92...

Open the catalog to page 2
OFFSHORE - 3

A wide choice of lifting solutions dedicated to your need HAND CHAIN BLOCK For vertical lifting without horizontal motion. Hand chain block compact design offers safety together with reduced weight. Ideal for construction and maintenance applications. HAND CHAIN BLOCK WITH LOW HEADROOM BUILT IN TROLLEY For vertical lifting and horizontal motion of the load. The low headroom conception of hoist and trolley combination extremly optimize the height of lift in reduced area. ELECTRIC HOISTS For vertical lifting with or without horizontal motion of the load. The motorized motion is dedicated for...

Open the catalog to page 3
OFFSHORE - 5

Electric wire rope hoists for loads from 800 to 80,000 kg fig. 1 VERLINDE has always been among the first companies to introduce new ideas for the innovation of hoisting units with a hook (more than 70 patents taken out in France and around the world). The new EUROBLOC VT electric wire rope hoist has been created within this avant-garde spirit, as it accounts for a total of 13 patents on its own. The EUROBLOC VT electric wire rope hoist is, as of now, the only hoisting unit with wire rope and a hook that offers, in its standard version: > The pulley block presents only a slight lateral...

Open the catalog to page 5
OFFSHORE - 6

EUROCHRIN VR' Electric chain hoist for loads from 63 to 5,000 kg Completely innovative, top of the range design, its fluid, contemporary and elegant lines confirm the power of this electric chain hoist. This new generation of EUROCHAIN VR hoists is the result of innovative technology ; new materials, new operating concepts, can adapt to each specific need. Lifting capacities. The load spectra for each hoist body have been revised upwards to optimise your lifting equipment investment. 1-fall lifting up to 2.5 tons in FEM 2m. This product advantage offers you the possibility of working at...

Open the catalog to page 6
OFFSHORE - 7

+ safety Clutch concept. The clutch position in the reducer ensures the load is held by the brake regardless of the machine's daily operating conditions. Low voltage or direct voltage command. Enables perfect operation for your usage context (operation in industrial environment, stage lifting, etc.). Variable speed electric travelling. The variable speed travelling combined with the high lifting speeds enables flexible and quick working in complete safety for the operator. Speed Speed Time Time -|- savings Maintenance operations are now simpler, quicker and more economical: > Easy access to...

Open the catalog to page 7
OFFSHORE - 9

ZHR * Hand chain block for loads from 500 to 20,000 kg ^ Technical characteristics > Overload limiter is standard equipment. > Four-bearing lifting mechanism. > Offshore high-resistance RAL 7021 powder coating, 220 |j thick. > Machined chain sprocket and gears provide smoother, more efficient operation. > 3 meters standard lift. Hand chain is 0.5 meters less than lift chain. Non-standard lifts available. > High strength grade 80 alloy steel load chain with corrosion-resistant galvanized (complies with standard EN 818, safety factor 4). Made in Europe. > Galvanized hand chain made in Europe....

Open the catalog to page 9
OFFSHORE - 10

ZHR-HPR Low headroom version manual travelling trolley hoist for loads from 500 to 20,000 kg ^ Technical characteristics > Characteristics of the hand chain block : see ZHR page 9. > Controlled via handwheel and chain. > Easy to adjust for different flange widths up to 305 mm. > Trolley body made of high-resistance steel. > Side plates finished with RAL 7021 dark gray coating, 70 p thick. > Steel rollers machined for smooth movement. > Rollers compatible with all types of I and H beams. > Wheel ball bearings are moisture-tight and maintenance free. > Galvanized hand chain. > Fall-prevention...

Open the catalog to page 10
OFFSHORE - 12

Load Chain : 7,9 Net Weight ; Q Approval By CE Serial No,]

Open the catalog to page 12
OFFSHORE - 13

Manual chain hoist for loads from 500 to 50,000 kg Technical characteristics > Epoxy Painting (min. 50 μm). > Machined chain sprocket and gears provide smoother, more efficient operation. > igh strength alloy steel load chain with corrosion-resistant galvanized H > Galvanized hand chain. > HV’s compact design offers safety together with reduced weight. Z Ideal for construction and maintenance applications. > Steel casing solidly protects chain sprocket, gearcase and handwheel cover. > Upper and lower alloy steel ISO hooks with safety latches. > Delivered with CE certificate. Options...

Open the catalog to page 13
OFFSHORE - 14

Load Standard height of Length of hand Lifting chain size Number Weight (kg) A B C D E lift (m) chain (m) (mm) of falls (kg)

Open the catalog to page 14
OFFSHORE - 15

construction for loads 500 to 50,000 kg ^ Technical characteristics > Epoxy Painting (min. 50 pm). > Machined chain sprocket and gears provide smoother, more efficient operation. > High strength alloy steel load chain with corrosion-resistant galvanized. > Galvanized hand chain. > ZHV's compact design offers safety together with reduced weight. Ideal for construction and maintenance applications. > Steel casing solidly protects chain sprocket, gearcase and handwheel cover. > Upper and lower alloy steel ISO hooks with safety latches. > Delivered with CE certificate. ^ Options > See options...

Open the catalog to page 15
OFFSHORE - 17

CHZ Manual travel trolley for loads from 1,000 to 100,000 kg ^ Technical characteristics > Can be used with any type of overhead hooked lifting device. > Operated by directly pushing the load (CHZD models) or using a handwheel and chain (CHZDD models). > Epoxy Painting (min. 50 |jm). > Easily adjustable to fit beams. > Steel rollers machined for smooth movement. > Trolley body made of high-resistance steel. ^ Options > EX ATEX CHV trolley (bronze coated load wheels, polyester paint,...). > CHV trolley full stainless steel (frame, load wheels,.., > CHV trolley with Aluminum Ceramic Coat...

Open the catalog to page 17

All VERLINDE catalogs and technical brochures

  1. STAGEMAKER SL

    28 Pages

  2. winches

    16 Pages

  3. PRD-PRV

    4 Pages

  4. LIMITER

    6 Pages

  5. EUROBLOC VT

    12 Pages

  6. EUROLIFT BH

    8 Pages

  7. Gantries

    8 Pages

  8. EUROSTYLE H2O

    16 Pages

  9. VARIATOR

    4 Pages

  10. MICROMOTE

    2 Pages

  11. EUROMOTE H

    4 Pages

  12. EUROSTYLE

    12 Pages

  13. Food Process

    20 Pages

  14. PAL

    6 Pages