video corpo

Manual products
16Pages

{{requestButtons}}

Catalog excerpts

Manual products - 1

Photo credit : VERLINDE. Manual product catalog Manual winches and hoists www.verlinde.com Réf : 11 2011 335 UGB

Open the catalog to page 1
Manual products - 2

Hand chain hoist for loads of 250 to 5,000 kg The VHR is a compact, high-performance hand chain block with rugged good looks, tested according to ofcial applicable standards. Technical characteristics > Machined chain sprocket and gears provide smoother, more efcient operation. > 3 meters standard lift. Hand chain is 0.5 meters less than lift chain. Non-standard lifts available. > High strength grade 80 alloy steel load chain with galvanized nish for corrosion resistance (comply with EN 818, safety factor 4). > Galvanized hand chain made in Europe. > VHR’s compact design offers safety...

Open the catalog to page 2
Manual products - 3

HAND HOISTS AND WINCHES A wide range of options is available for this hand chain > VHR is stainless steel lift chain and hand chain. > VHR with normal overherad trolley (HPN). > VHR with short headroom trolley (HPR). > VHR Ex with short headroom trolley. > VHR with normal headroom trolley. H4 Chain Num. force weight Load A B 0a1 a2 min size of falls (kg) (kg) Overhead travel trolley

Open the catalog to page 3
Manual products - 4

Sparkproof hand chain block Sparkproof hand chain block for loads from 500 to 20,000 kg A compact, high-performance chain block with rugged good looks, tested according to ofcial standards. ® Overhung with travel trolley CHDD type, low-headroom handwheel and chain operation Sparkproof version of hand chain block and trolley

Open the catalog to page 4
Manual products - 5

HAND HOISTS AND WINCHES A Chain size Specication identical to those for the standard version of the VHR except for the following features : > ATEX Marking : Ex II 2GD c IIC T4 T+135 °C. > Suitable for Zones 1&2 and 21 and 22 hazardous areas. > Overload limiter is standard equipment. > Stainless steel 316L hand chain. > Bronze coated hooks. > High-resistance RAL 9006 aluminum-type powder coating, 70 μ thick. > ISO hooks with safety latch. > Delivered with CE certicate, and hook and chain certicate. Options A wide range of options is available for this hand chain block : > VHR with stainless...

Open the catalog to page 5
Manual products - 6

Heavy-duty hand chain block for loads from 500 to 20,000 kg

Open the catalog to page 6
Manual products - 7

HAND HOISTS AND WINCHES A Chain size Technical characteristics Specication identical to those for the standard version of the VHR except for the following features : > Overload limiter is standard equipment. > Four-bearing lifting mechanism. > High strength grade 80 alloy steel load chain with corrosion-resistant galvanized (complies with standard EN 818, safety factor 4). Made in Europe. > Galvanized hand chain made in Europe. > Upper and lower alloy steel ISO hooks with safety latches. > Weston-type load brakes. > Offshore high-resistance RAL 7021 powder coating, 220 μ thick. > Delivered...

Open the catalog to page 7
Manual products - 8

Low headroom version manual travelling trolley hoist for loads from 500 to 20,000 kg Especially designed for use in areas where optimal use of short headroom is essential. Technical characteristics Specications of the VHR (see page 2) and of the ZHR (see page 6) plus the following features : > HPR CHDD for overhead VHR or ZHR manual chain block. > Controlled via handwheel and chain. > Easy to adjust for different ange widths up to 305mm. > Trolley body made of high-resistance steel. > Side plates nished with RAL 7021 dark gray coating, 70 μ thick. > Steel rollers machined for smooth...

Open the catalog to page 8
Manual products - 9

HAND HOISTS AND WINCHES

Open the catalog to page 9
Manual products - 10

Manual Lever Hoist for loads from 250 to 3,000 kg The PLV manual lever hoist is a compact unit for lifting, pulling and sliding. Especially suitable for industrial use. Easy to handle, this convenient unit can is ready for all sorts of jobs anywhere at the production or building. Great for tight spots where headroom is limited. Technical characteristics > Four good-looking, robust, compact lightweight, easy handling models. > PLV can be used in any position ; simply switch the lever to make the PLV easier to handle. > Made with special steels, PLV lever hoists are very compact. > The lever...

Open the catalog to page 10
Manual products - 11

HAND HOISTS AND WINCHES > Treated steel alloy upper and lower ISO turning hooks with safety latches and inspection points. > Chain can be declutched when winch is not loaded. > Lever can rotate 360°. Rubber grip.

Open the catalog to page 11
Manual products - 12

Manual Lever Winch for loads from 800 to 3,200 kg The TLV lever winch is designed for lifting and pulling loads over long distances. Technical characteristics > Designed for lifting and pulling loads over long distances. > Built with high resistance aluminum, making it light and easy to handle. > Heavy duty tool suitable for tough working conditions. > Low maintenance make it suitable for outdoor work. > Delivered with a 20m / 40m rope. > Delivered with CE certicate, and hook and chain certicate.

Open the catalog to page 12
Manual products - 13

HAND HOISTS AND WINCHES

Open the catalog to page 13
Manual products - 14

& Endless screw winch and geared winch 150 to 3,000 kg Technical characteristics > Encased mechanism. > Automatic brake. > Adjustable removable crank. > Can be attached horizontally or vertically (depending on model). > Very robust thanks to exceptionally sturdy chassis. > Mechanical parts protected with cataphoretic coating. > Can be declutched only when unloaded ; safety system prevents declutching when loaded. 1st level load capacity (kg) Total rolling capacity (m) Crank force required (daN) Weight without cable (kg)

Open the catalog to page 14
Manual products - 15

HAND HOISTS AND WINCHES Gears have passed every lype of breakage and endurance test. Ratchet brake with stainless steel spring has been proven the best system for this type of equipment. MV winches feature a drum that can be disengaged with a small, easily accessible lever. A safety mechanism prevents any declutching when the winch is loaded. Adjustment knob Conveniently captive knob adjusts crank tightness. Cannot get lost. Wheel and worm gear have Gears have passed every type of breakage and endurance test fir maximum reliability. Ratchet brake with stainless steel spring has been proven...

Open the catalog to page 15
Manual products - 16

VERLINDE is : > The leading French manufacturer and exporter of lifting and handling equipment. > A comprehensive range of 30 groups of lifting equipment from 60 to 250,000 kg. > ISO 9001 Quality control certied. Our references Metallurgical, Mechanical, Nuclear industries Chemical and Petrochemical industries Aeronautics industry Sano Aventis - Du Pont De Nemours - Total Aérospatiale - Airbus - Eurocopter - Air France - Aéroport de Paris - Snecma - Dassault Aviation Agri-food industry Renault - Peugeot - Citroën - Scania - Ford - RVI - Volkswagen - Michelin - Massey Fergusson - Manitou -...

Open the catalog to page 16

All VERLINDE catalogs and technical brochures

  1. STAGEMAKER SL

    28 Pages

  2. winches

    16 Pages

  3. PRD-PRV

    4 Pages

  4. LIMITER

    6 Pages

  5. EUROBLOC VT

    12 Pages

  6. EUROLIFT BH

    8 Pages

  7. Gantries

    8 Pages

  8. EUROSTYLE H2O

    16 Pages

  9. VARIATOR

    4 Pages

  10. MICROMOTE

    2 Pages

  11. EUROMOTE H

    4 Pages

  12. EUROSTYLE

    12 Pages

  13. OFFSHORE

    20 Pages

  14. Food Process

    20 Pages

  15. PAL

    6 Pages