video corpo

EUROSTYLE
12Pages

{{requestButtons}}

Catalog excerpts

EUROSTYLE - 1

Range of jib cranes mounted on a wall or on a column, with total or partial rotation capability, manual or motorized.

Open the catalog to page 1
EUROSTYLE - 2

Individual handling is essential to each workstation to prevent a slowdown in the production rhythm when using the traveling crane in service at the production plant. VERLINDE offers a wide range of jib cranes that are strong, with a nice design, high performance and equipped with the following range of hoists: EUROCHAIN VR, EUROBLOC VT, EUROLIFT BH, or EQUIBLOC AIR : > Designed in compliance with DIN 15018 standards, all steel. > 2m group classification. > Temperature rating -10° C to +40° C. > IP 44 (IP 55 available upon request) protection rating of power supply lines, cutout, etc. >...

Open the catalog to page 2
EUROSTYLE - 3

Choosing the jib cranes that is most adequate for your needs Jib cranes, whether they are mounted on a wall or on a column, are intelligent and inexpensive handling systems that do not require modification of the building structure in which they are being installed. They don’t take up much space but they allow transporting goods on a three-dimensional plane. Useful in any industrial sector: foundries, boiler works, mechanical works, paper factories, etc. They are the ideal complement for the traveling cranes used in every section of an industrial plant. They increase in autonomy and...

Open the catalog to page 3
EUROSTYLE - 4

Wall-mounted jib crane These are the most inexpensive jib cranes if you have a wall or a post that is strong enough, close to the workstation it will service. The height available under the iron beam is only limited by the height of the building itself. The main feature is the arm: to ensure easy rotation, the arm is articulated in the two captive hinges in the two projecting support members that make up the anchor plate. Description VAT Loads of 125 to 2,000 kg. Span from 2 to 8 meters according load. > Wall jib crane for indoor use, 180° rotation, with overbraced beam. > This type of jib...

Open the catalog to page 4
EUROSTYLE - 5

VATAL Loads of 63 to 2,000 kg. Span from 2 to 8 meters according load. Description > ight construction. L > UROSYSTEM ALU hollow-section, aluminum wall jib E crane for indoor use, 180° rotation, with overbraced beam. > his type of jib crane cannot be motorized. T > orizontal and vertical reactions are understood to H be under nominal load. > AL 1028 yellow polyurethane finish for the attachR ment. > ttached with M24, 10.9 grade bolts (not provided). A > Hoist trolley provide. > Power supply cable provided. > Maximum hoisting speed = 16 m/min. Options > Lockable main switch. > Rotation...

Open the catalog to page 5
EUROSTYLE - 6

Overbraced column-mounted jib crane These are overbraced wall-mounted jib cranes attached to a steel tube column fitted into a round base reinforced. They are completely independent from the building. Anchorage needs to be installed because they must be anchored to the ground. < VFT Loads from 125 to 2,000 kg. Span from 2 to 8 meters according load. Height under beam: 2.5 m. > Description > Pillar jib crane for indoor use, partial 270° rotation, with overbraced beam. > This type of jib crane cannot be motorized. > Theoretical deflection under nominal load = approximately 1/250th of the span...

Open the catalog to page 6
EUROSTYLE - 7

^ Description > Pillar jib crane for indoor use, partial 270° rotation, with underbraced beam. > This type of jib crane cannot be motorized. > Theoretical deflection under nominal load = approximately 1/250th of the span + height, without exceeding 1/100th of the span in itself. > The Maximum Moment (MM) is given as a rough guide and under nominal load. > Protection: 3-layer system, RAL 1028 yellow polyurethane finish. > Maximum hoisting speed = 16m/min. ^ Options > Installation template + anchor rods (or base plate for chemical anchors, keeping its limitations in mind). > Hoist power...

Open the catalog to page 7
EUROSTYLE - 8

Motorized rotation. Loads from 125 to 10,000 kg. Span from 2 to 12 meters according load. Height under beam: 3 m. < VFP Manual rotation. Loads from 125 to 10,000 kg. Span from 2 to 12 meters according load. Height under beam: 3 m. ^ Description > Full-rotation pillar jib crane with underbraced beam. > Theoretical deflection under nominal load = approximately 1/250 th of the span + height, without exceeding 1/100 th of the span in itself. > Protection: 3-layer system. > RAL 1028 yellow polyurethane finish. > Maximum hoisting speed = 16m/min. ^ Options > Installation template + anchor rods...

Open the catalog to page 8
EUROSTYLE - 9

VFP n VFM Greater capacity and span capabilities are available. Contact us for more information. Jib cranes especially designed for water treatment applications Loads from 300 to 500 kg. Span from 1.5 to 2 meters according load. Ideal for operations in used water treatment stations or at shore sites, EUROSTYLE VEFP and VEP jib cranes are easily transported and manoeuvred by one person. Furthermore, they are dismountable to be moved from one base to another. Description > Aluminium movable jib crane, rotation 360°. > Adjustable span up to 1.50 m or 2 m according SWL (VEFP). > SWL 300 or 500...

Open the catalog to page 9
EUROSTYLE - 10

"Templier" jib crane with articulated armsThe "Templier" articulated jib crane by VERLINDE can easily handle loads from 50 to 1,000 kg, over a 5 to 2 m span, almost full circle, and practically no dead space (the articulated arm allows working around obstacles. Jib crane mounted on column. Entirely independent from the building, anchored to the ground. This crane can serve an almost circular working area with a maximum radius of 5 meters. Templier TC Premium Loads from 50 to 1,000 kg. Span from 2 to 5 meters according load. Height under upper lifting hook: 3 m. Description > Articulated...

Open the catalog to page 10
EUROSTYLE - 11

Jib crane mounted on bracket. This crane serves an almost circular working area with a radius of 5 meters (secured to a wall or mast post). Templier TAPremium Loads from 500 to 1,000 kg. Span from 2 to 5 meters according load. ^ Description > Articulated wall jib crane for indoor use, 180° rotation for arm 1 and 300° rotation for arm 2. > Protection: 3-layer system. > RAL 1028 yellow polyurethane finish. > Maximum hoisting speed = 16m/min. ► Options > Hoist power supply cable + lockable main switch. > Standpipe. > Hot dip galvanizing (contact us). > Rotation stops to weld onto the assembly....

Open the catalog to page 11

All VERLINDE catalogs and technical brochures

  1. STAGEMAKER SL

    28 Pages

  2. winches

    16 Pages

  3. PRD-PRV

    4 Pages

  4. LIMITER

    6 Pages

  5. EUROBLOC VT

    12 Pages

  6. EUROLIFT BH

    8 Pages

  7. Gantries

    8 Pages

  8. EUROSTYLE H2O

    16 Pages

  9. VARIATOR

    4 Pages

  10. MICROMOTE

    2 Pages

  11. EUROMOTE H

    4 Pages

  12. OFFSHORE

    20 Pages

  13. Food Process

    20 Pages

  14. PAL

    6 Pages