Eurobloc VM essential
6Pages

{{requestButtons}}

Catalog excerpts

Eurobloc VM essential - 1

s Variable lling for trave option in available EUROBLOC Electric wire rope hoist and crane kit with load from 2,000 to 20,000 kg Ref : 06 2019 336 GB

Open the catalog to page 1
Eurobloc VM essential - 2

EUROBLOC Electric wire rope hoist and crane kit with load from 2,000 to 20,000 kg >Safety • lectro mecanical load limiter deliver as standard (Mandatory equipment E according “Machinery“ directive). • Hoisting limit switch. • 2 travelling speed. • Galvanized wire rope, high safety factor (Coef. 4,6 in 2m group). • 2 step travelling limit switch. • P 55 protection on electric cubicle, oversize dimensions to place and I protect all components. • Low voltage control (48 V) for higher safety. • Rotating hook with safety latch. • omplete documentation pack (hoist test certificate, hook and wire...

Open the catalog to page 2
Eurobloc VM essential - 3

>Options available • Back-up pendant (non movable) in case of radio failure. • IGIMOTE Radio instead of radio remote ESSENTIAL. D • erailment catches (double girder trolley). D • ook operated limit switch HS22 (Manual reset). H • ight and horn for overload indication (98 dB or 108 dB). L • rolley limit switch 2-step (slow+stop). T • rash protection with photo cell (1 set). C • ndicator beacon for crane (radio in use). I • orn 98 dB or 108 dB. H • pare transmitter for DIGIMOTE. S • adio Battery & charger set for Tele Radio. R • rovision for radio control. P • ack-up pendant attached to crane...

Open the catalog to page 3
Eurobloc VM essential - 4

COMPOSANTS + Standard kit for single and double girder top running crane. Load from 2,000 to 20,000 kg Electric wire rope hoist EUROBLOC ESSENTIAL is available too with complete kit COMPOSANTS+ ESSENTIAL. You will discover here under kit contents : 1 Electric wire rope hoist (EUROBLOC VM ESSENTIAL). • Load range : 2000 to 20,000 kg. • Height of lift : 6, 9 or 9,5 m (VM1, VM2) and 8, 9, 10, 12 or 13 m (VM3). • Reeving : 4 or 8 falls. • Dual speed hoist motor with 6:1 speed ratio. • Dual speed trolley travel via contactors with 4:1 speed ratio. • Short headroom trolley and double girder...

Open the catalog to page 4
Eurobloc VM essential - 5

Travelling Motor/gear box : 2 speeds. 2 steps travelling limit switch. High wire rope/drum diameter ratio. Hoisting Motor : 2 speeds. EUROBLOC >Technicals datas • Power supply : 400 V/3 ph/50 Hz. • Control voltage : 48 V. • Working temperatures : +5 °C to +40 °C. Rope guide built “without spring”. Electro mecanical load limiter deliver as standard. >Options available • Lifting limit switch activate by hook block. • Overload indication by lighting or audible signal. • Variable speed for travelling. Rubber buffer deliver as standard. Electric cubicle, IP 54 protection. Low voltage control...

Open the catalog to page 5
Eurobloc VM essential - 6

VERLINDE is: > The leading French manufacturer and exporter of lifting and handling equipment. > A comprehensive range of 30 groups of lifting equipment from 60 to 250,000 kg. > ISO 9001 Quality control certified and ISO 14001 Environmental Management Systems. In France: A sales network and after sales service points, EUROPONT travelling crane construction plants and a distributor network. A customer service in more than 92 countries. Metallurgy, Mechanics, Nuclear ArcelorMittal, Unimetal, Stein, NFM, Framatome, Alstom Chemicals, Petrochemicals industry Sanofi Aventis, Total, Du Pont De...

Open the catalog to page 6

All VERLINDE catalogs and technical brochures

  1. STAGEMAKER SL

    28 Pages

  2. winches

    16 Pages

  3. PRD-PRV

    4 Pages

  4. LIMITER

    6 Pages

  5. EUROBLOC VT

    12 Pages

  6. EUROLIFT BH

    8 Pages

  7. Gantries

    8 Pages

  8. EUROSTYLE H2O

    16 Pages

  9. VARIATOR

    4 Pages

  10. MICROMOTE

    2 Pages

  11. EUROMOTE H

    4 Pages

  12. EUROSTYLE

    12 Pages

  13. OFFSHORE

    20 Pages

  14. Food Process

    20 Pages

  15. PAL

    6 Pages