*mydirectindustry

VMD10

Product catalog summary

Overview
VMD10 is a compact and powerful in-line actuator designed for industrial automation applications, particularly where installation space is limited. It operates on either 24V DC or 12V DC input voltage and can handle a maximum load of 1000N for both push and pull actions at 24V DC.

Specifications

Input Voltage: 24V DC / 12V DC
Max Load: 1000N (push/pull) @ 24V DC
Max Current: 3.8A @ 24V DC
Max Speed: 18 mm/sec @ no load
Stroke Range: 50–300 mm (other strokes available)
Duty Cycle: 10% or 2 min continuous operation in 18 min
IP Protection Level: IPX4
Color: Black
Noise Level: ≤ 65dB
Preset Limit Switches: Yes

Options

Straight Cable / Spiral Cable
Connector Types: F type Din plug (4pin) / Round and Flat plug (2pin)

Compatibility

Handsets: VHD, VHT, VH2N, VRF, VTX
Control Boxes: VT-control box, VCB3T

Performance Data
The VMD10 models vary in push/pull capacity, speed, and current requirements. For example, the VMD10-XX-A4-16-XXX.XXX-CXX model supports 1000N push/pull with a speed of 8 mm/s at no load and 6 mm/s at full load, requiring 4.2A at 12V and 3.1A at 24V.

Dimensions

Front Connector Types: C1x, C3x, C9x, CAx, CBx
Rear Connector: Cx6
Available Stroke Range: 50–300mm
Retracted Length: Varies by front connector type, e.g., C1x, C3x, CBx require stroke + 256mm
Extended Length: Calculated as Stroke + Retracted Length

Terms of Use
Users must determine the suitability of Venture products for specific applications. Products are subject to modifications and may be discontinued without notice.

Ordering Key
The ordering key for VMD10 includes type, input voltage, motor and spindle type, gear ratio, retracted and extended lengths, and connector types.

Catalog excerpts

Product Data Sheet Features ♦ VMD10 is a compact and powerful in-line design. This linear and compact design makes the VMD10 well suited for use in industrial applications where installation space is limited. ♦ Main applications : industrial automation ♦ Input voltage : 24V DC / 12V DC ♦ Max. load : 1000N (push/pull) @ 24V DC ♦ Max. current : 3.8A @ 24V DC ♦ Max. speed : 18 mm/sec @ no load ♦ Stroke : 50~300 mm (other stroke available) ♦ Duty cycle : 10% or 2 min continuous operation in 18 min. ♦ IP protection level : IPX4 ♦ Color : Black ♦ Noise Level : ^ 65dB ♦ Preset limit switches

Open the catalog to page 1

Options ♦ Straight Cable / Spiral Cable ♦ Connector: F type Din plug (4pin) / Round and Flat plug (2pin) Compatibility 1. Handset VHD, VHT, VH2N, VRF, VTX 2. Control box VT-control box, VCB3T

Open the catalog to page 2

Front Connector Aluminum+ bushing Round hole+ bushing Rear Connector Available stroke (S) range = 50～300mm Retracted length (A) Front connector = C1x, C3x, CBx ≧ stroke + 256mm Front connector = C9x ≧ stroke + 282mm Front connector = CAx ≧ stroke + 265mm

Open the catalog to page 4

Ordering Key VMD10—□□—□□—16—□□□.□□□—C□□ Type Input Voltage 12：12V DC 24：24V DC Motor and Spindle Type A4 (Refer to Performance Data) A6 A8 AC Gear Ratio A：Retracted Length B：Extended Length Front Connector 1：Plastic 3：Round hole 9：Universal joint A：Aluminum+ bushing B：Round hole+ bushing Rear Connector 6：Plastic Terms of Use The user is responsible for determining the suitability of Venture products for specific applications. Due to continuous development in order to improve its products, Venture products are subject to frequent modifications and changes without prior notice. Venture reserves...

Open the catalog to page 5

VMD10

VMD10

Catalog excerpts

All Venture catalogs and technical brochures

Archived catalogs