Landing Gear Specifications

Product catalog summary

Overview: This document provides technical specifications, installation procedures, and safety warnings for a power kit system used in 5th wheel landing gear applications. It includes details on system capacities, component specifications, and wiring instructions.

Specifications:

Manual Crank Capacity: Dynamic - 8,000 lbs system, 4,000 lbs per leg; Static - 16,000 lbs system, 8,000 lbs per leg.
Single Power Kit: Dynamic - 5,000 lbs system, 2,500 lbs per leg; Duty Cycle - 10%.
Dual Power Kit: Dynamic - 8,000 lbs system, 4,000 lbs per leg; Duty Cycle - 10%.
Stroke: 20 inches; Drop Leg Adjustment: 16 inches.
Speed: Single Power Kit - 2.5 in./min; Dual Power Kit - 3.0 in./min.

Installation Procedures:

Align the slotted output shaft of the Power Kit with the reduction box and attach using supplied bolts.
Mount control switches on a smooth, flat surface, avoiding uneven or carpeted areas.
Follow specific wiring instructions for single, dual, and three-switch configurations, ensuring proper connection to the battery and motor leads.

Safety Warnings:

Do not exceed rated capacities to avoid potential damage.
Switches are not ignition protected; avoid installation in battery or propane storage compartments.
Ensure the trailer remains horizontal during operation to prevent damage.
Moving parts can cause serious injury; ensure switches are located safely.

Component Selection Guide: The document includes a detailed list of components with item numbers and descriptions for various system configurations, such as standard, heavy-duty, inside mount, outside mount, and universal systems.

Additional Notes:

Power Kit is protected with a mechanical slip clutch to prevent overloading.
Ensure proper wire gauge and battery charge to avoid excessive amp draw and blown fuses.

Catalog excerpts

SINGLEDUAL RATED LOAD AMPS** SPEED/IPMRATED LOAD AMPS** SPEED/IPM 5000 lbs (2 legs) 25 - 30 2.54000 lbs. (ea. Leg) 20 -25 ea. 3.0 > Switch is not ignition protected. DO NOT install in battery or DO NOT EXCEED RATED CAPACIT Y Propane Storage compartments. > Potential damage to frame of trailer may occur if legs or MOVING PARTS CAN CAUSE SERIOUS BODILY INJUR Y power kits are operated unevenly. Front of trailer mustSwitches must be located in an area where operator can notremain horizontal.contact moving parts while activating motor > 1. Align slotted output shaft of Power Kit with short shaft of...

Open the catalog to page 4

PICTORIAL VIEWS WITH GENERALASSEMBLY & MOUNTING DIMENSIONS 9000 SERIES GEARBOX35.3 TO 1.0 RATIOOUTPUT ~ 80 RPM @ 300 in/lbs @ 30 AMPS > DATEDEC. 2006SCALEFULL DP-9000 > REL size="-2">

Open the catalog to page 5

ASSEMBLY DWG ~ SEE DETAILDWG'S FOR TOLERANCES & DIM'SNOT SHOWN > SCALEFULLDATEOCT 2004 AA-96002 X > 1 size="-1">

Open the catalog to page 21

Foam Gasket Shrink Long BLK RED Short BLK PINK >

Open the catalog to page 22

Shrink Long BLK RED Short BLK PINK >

Open the catalog to page 23

SWITCH 1SWITCH 2 SWITCH 1SWITCH 2SWITCH 3 DUAL SWITCH SINGLE SWITCH THREE SWITCH >

Open the catalog to page 24

All Venture catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list