800-850 Series Techincal Data
7Pages

COMMERCIAL ACTUATOR PRODUCTS LITERAL/NUMERIC PART No. CODE SYSTEM Rev: 16-Feb-09 prt dte: 2/16/09 EXAMPLE: ITEM NO. MA-834118332-18.00BK = MOTORIZED ACTUATOR WITH A BLACK GEARBOX, 36VDC 6800 RPM MOTOR, 58:1 RATIO, REED SWITCH, LIMIT SWITCHES, 800 SERIES 2" DIA. O.T., 3/4-8 L.H. ACME SCREW, STD CLAMP, 1/2" FLAT END MOUNT, 18.00" STROKE, Boot, Keyed GEARBOX TYPE ( 0 ) = NONE ( 3 ) = Raw Hsg w/o Strain Relief ( 4 ) = Raw Hsg w/Strain Relief ( 5 ) = Tan Hsg w/o Strain Relief ( 6 ) = Tan Hsg w/Strain Relief ( 7 ) = Blk Hsg w/o Strain Relief ( 8 ) = Blk Hsg w/Strain Relief ( 9 ) = SPECIAL (Specify) SENSOR TYPE ( 0 ) = NONE ( 1 ) = REED SWITCH *** ( 2 ) = HALL EFFECT *** ( 3 ) = POTENTIOMETER ( 4 ) = ENCODER *** ( 9 ) = SPECIAL (Specify) UNIT TYPE ( M ) = GEARBOX ONLY ( A ) = ACTUATOR TUBE ONLY ( MA ) = MOTORIZED ACTUATOR *120vdc MOTOR SUPPLIED WITH 10 amp RECTIFIER FOR USE IN 120vac CIRCUIT STANDARD MODIFIERS ( OB ) = OPTIONAL BRAKE ( B ) = TUBE BOOT ( K ) = KEYED ( MB ) = Motor Boot ( M ) = MODIFIED ( P ) = PIGTAIL ( CE** ) Per Note MA - 8 ELECTRIC MOTORS ( 0 ) = NONE ( 1 ) = 12vdc 6800 RPM ( 2 ) = 24vdc 6800 RPM ( 3 ) = 36vdc 6800 RPM ( 4 ) = 90vdc 4200 RPM ( 5 ) = 120vdc* 4200 RPM ( 7 ) = STEPPER ( 8 ) = BRUSHLESS DC ( 9 ) = SPECIAL (Specify) ( A ) = 12vdc 2500 RPM ( B ) = 24vdc 2500 RPM ( C ) = 36vdc 2500 RPM ( D ) = 90vdc 2500 RPM ( E ) = 120vdc* 2500 RPM ( F ) = 12vdc 1200 RPM ( L ) = 12vdc 9000 RPM ( T ) = 18vdc 900 RPM SCREW DATA ( 0 ) = NONE ( 3 ) = 3/4-8 L.H. ACME ( 5 ) = 5/8-5 R.H. BALL ( 6 ) = 3/4-5 R.H. BALL ( 9 ) = SPECIAL (Specify) GEAR RATIO ( 0 ) = NONE ( 1 ) = 18:1 GEAR DRIVE ( 2 ) = 28:1 GEAR DRIVE ( 4 ) = 58:1 GEAR DRIVE ( 5 ) = 360:1 WORM DRIVE ‡‡ ( 6 ) = 560:1 WORM DRIVE ‡‡ ( 7 ) = 1160:1 WORM DRIVE ‡‡ ( 9 ) = SPECIAL (Specify) OUTER TUBE DIAMETER ( 0 ) = NONE ( 1 ) = 2.25" 1200 Series ( 8 ) = 2.00" 800 SERIES ( 9 ) = SPECIAL (Specify) LIMITS ( 0 ) = None (w/o CLT or LS) ( 1 ) = LIMIT SWITCHES ( 2 ) = CLUTCH ( 3 ) = BOTH ( 4 ) = Clutch w/ Manual Crank NOTE: ( 5 ) = Both w/ Manual Crank ( 6 ) = Limits w/Manual Crank w/o CLT ( 7 ) = None w/Manual Crank ( 9 ) = SPECIAL ( Specify) ** CE Certification available on 12v, 24v & 36v models only and comply with; Machinery Directive: EN60204-1: 2006 and EMC: EN55014-1: 2006, EN 61000-6-4: 2007 TUBE MOUNTING ( 0 ) = NONE ( 1 ) = TRUNNION ( 2 ) = HD INLINE BRACKET ‡ ( 3 ) = STD CLAMP ( 4 ) = H.D. CLAMP ( 5 ) = HD Long CS CLAMP ( 6 ) = HD Long CLAMP ( 7 ) = Std INLINE BRACKET ‡ ( 8 ) = HD INLINE Clamp ( 9 ) = SPECIAL (Specify) END MOUNTS ( 0 ) = NONE ( 1 ) = 1/2' SWIVEL ( 2 ) = 1/2' FLAT ( 3 ) = 3/4' SWIVEL ( 4 ) = Universal (specify thread) ( 5 ) = CLEVIS ( 9 ) = SPECIAL (Specify) ‡ Std INLINE BRACKET RATED FOR 750 LB LOAD HD INLINE BRACKET RATED FOR 3000 LB LOAD STD CLUTCH SETTINGS ARE: 125 in-lbs FOR 58:1 GEARBOXES 125 in-lbs FOR 28:1 GEARBOXES 75 in-lbs. FOR 18:1 GEARBOXES CUSTOM CLUTCH SETTINGS ARE AVAILABLE NOTE: STD U.O.S. ACME SCREWS ( A ) ARE LEFT HAND (L.H.) PITCH BALL SCREWS ( B ) ARE RIGHT HAND (R.H.) PITCH *** SPECIFY DESIRED PPR (Pulses Per Revolution) or PPI (Pulses Per Inch) ‡‡ These ratios are achieved by combining the 8500 gearbox with the 890 series 20:1 worm drive gearbox.

STRDKE MDRE THAN 12' 7.4' BALL SCREW DRIVE TRUNNIDN MOUNTING CUSTDM STRDKES AVAILABLE UPON REQUEST ACTUATOR PERFORMANCE SEE SHEET NO. 2 FOR END MOUNT OPTIONS. SEE SHEET NO. 3 & 4 FOR MOUNTING OPTIONS TRUNNION BRACKET DETAILS 3636 DAYTDN PARK DRIVE

(SPECIFY DESIRED THREAD) MOUNTING OPTIONS 3636 DAYTON PARK DRIVE

STANDARD CLAMP HEAVY DUTY CLAMP HEAVY DUTY LONG CLAMP TRUNNION CLAMP 2" DIA. TUBE MOUNTING OPTIONS NOTE: EACH SUPPLIED WITH ALL MOUNTING HARDWARE 3636 DAYTDN PARK DRIVE

MOUNTING BRACKET #2 HEAVY DUTY IN-LINE TUBE MOUNTING BRACKET 2" DIA. TUBE MOUNTING OPTIONS NOTE: EACH SUPPLIED WITH ALL MOUNTING HARDWARE UNIVERSAL IN-LINE TUBE MOUNTING BRACKET 3636 DAYTDN PARK DRIVE

TRAVEL IN EITHER DIRECTION TRUNION MOUNTING DPTIONS 3636 DAYTO.N PARK DRIVE

TRUNNION MOUNTING - ACME SCREW TRUNNION MOUNTING