1. Catalogs
  2. Ventur
  3. HXCBTBR -H HCXTTTR TXBR - TXTR

HXCBTBR -H HCXTTTR TXBR - TXTR

HXCBTBR -H HCXTTTR TXBR - TXTR
1 / 44 PagesView full catalog

HXCBTBR -H HCXTTTR TXBR - TXTR

Product catalog summary
Introduction
This document serves as an instruction manual for S&P ventilators, highlighting the importance of adhering to safety regulations and standards during installation, use, and maintenance.
Specifications and Compliance
The ventilators comply with EC standards and are manufactured under strict safety regulations. They must adhere to the Low Voltage Directive 2006/95/CE, Machinery Directive 2006/42/CE, and Electromagnetic Compatibility Directive 2004/108/CE.
Transport and Handling
Ventilators should be transported and stored in their original packaging to prevent damage. Heavy products require appropriate lifting equipment to avoid injury or damage.
Installation Safety
Installation must be conducted by qualified personnel, ensuring compliance with local mechanical and electrical norms. Adequate protective measures are necessary for ventilators in high-risk areas, and they should not be used in explosive or corrosive environments.
Operational Guidelines
Before operation, ensure all connections are secure, safety devices are in place, and there are no loose materials that could be sucked into the ventilator. The apparatus should not be used in explosive or corrosive environments.
Maintenance
Regular inspections are required to prevent dirt accumulation, which could shorten the product's lifespan. Maintenance should adhere to current safety regulations and ensure the device is disconnected from the electrical network before any work.
Recycling
Users are encouraged to recycle packaging materials and dispose of replaced machines responsibly, in accordance with EEC standards.
Customer Support
For any queries, users are advised to contact the S&P after-sales service or visit their website.
Installation and Safety Instructions
Consult Technical Services before using the device in environments with over 95% relative humidity. Ensure adequate air intake in rooms with combustion devices. During installation, ensure no objects can be sucked in or moved by the fan. Verify that all fixings are secure and the support structure can handle maximum power operation. Disconnect the device from the electrical network before handling, even if stopped. Ensure voltage and frequency match the specifications on the nameplate. Follow the connection diagram for electrical connections and ensure proper grounding and protection settings.
Commissioning
Before operation, verify that the device and electrical installation are correctly fixed, no foreign materials are present, and all protective devices are connected and functioning. Check the rotation direction of the fan and ensure no abnormal vibrations occur. If a protective device is triggered, disconnect and inspect the installation before restarting.
Important Safety Notes
Installation must be performed by qualified personnel and comply with national mechanical and electrical standards. After commissioning, the device must meet Low Voltage Directive 2006/95/CE, Machinery Directive 2006/42/CE, and EMC Directive 2004/108/CE. Ensure adequate protection in accessible danger zones. Devices are designed to move air within specified limits and should not be used in explosive or corrosive environments without prior technical consultation.
See more

Catalog excerpts

HXCBTBR -H HCXTTTR TXBR - TXTR-1

HXBR - HXTR TXBR - TXTR Instructions Manual Manuel d'instructions Gebruiksaan wijzing Instruktions hândbog Instrukcja obsiugi Instrukcijq gidas Eyxeipiöio Xpqoqç Kullanma Kilavuzu

 Open the catalog to page 1
HXCBTBR -H HCXTTTR TXBR - TXTR-3

Manual de instrucciones ESPAÑOL Le agradecemos la confianza depositada en S&P mediante la compra de este producto, que ha sido fabricado según reglas técnicas de seguridad, conformes a las normas de la CE. Antes de instalar y poner en funcionamiento este producto, lea atentamente el presente libro de instrucciones pues contiene indicaciones importantes para su seguridad y la de los usuarios durante la instalación, uso y mantenimiento de este producto. Una vez finalizada la instalación entrégueselas al usuario final. Compruebe el perfecto estado del aparato al desembalarlo ya que cualquier defecto...

 Open the catalog to page 3
HXCBTBR -H HCXTTTR TXBR - TXTR-4

Puesta en servicio. Antes de poner en funcionamiento la instalación, realizar las siguientes comprobaciones: - La fijación del aparato y la instalación eléctrica se han realizado correctamente. - Los dispositivos de seguridad eléctrica están debidamente conectados. - No hay restos de materiales de montaje ni cuerpos extraños que puedan ser aspirados ni en el área del ventilador ni en los conductos si los hubiere. - Sistema de protección de puesta a tierra conectado. - Dispositivos de protección eléctrica conectados, debidamente ajustados y en estado operativo. - Estanqueidad de las entradas de...

 Open the catalog to page 4
HXCBTBR -H HCXTTTR TXBR - TXTR-5

Instructions Manual ENGLISH Thank you for placing your confidence in S&P by buying this product. It has been manufactured following current technical safety regulations and in compliance with EC standard. Please read this instructions booklet carefully before installing or starting up the product. It contains important information on personal and user safety measures to be followed while installing, using and carrying out maintenance work on the equipment. Once the product has been installed, please hand in this booklet to the end user. Check that the apparatus is in perfect condition while unpacking....

 Open the catalog to page 5
HXCBTBR -H HCXTTTR TXBR - TXTR-6

- If a ventilator is installed in a duct, the duct must be exclusively for the ventilation system. Starting up. Before starting up the machine, make sure that: - The apparatus is well secured and the electrical connections have been carried out correctly. - The safety devices have been adequately connected. - No loose material or fitting remains can be sucked up by the ventilator. If the ventilator has been mounted in a duct, make sure it is clear of loose material. - The earth fittings are adequately connected. - The electrical safety devices are correctly connected, adequately adjusted and...

 Open the catalog to page 6
HXCBTBR -H HCXTTTR TXBR - TXTR-7

Manuel d’instructions FRANÇAIS Ce produit a été fabriqué en respectant de rigoureuses règles techniques de sécurité, conformément aux normes de la CE. Avant d’installer et d’utiliser ce produit, lire attentivement ces instructions qui contiennent d’importantes indications pour votre sécurité et celle des utilisateurs, pendant l’installation, l’utilisation et l’entretien de ce produit. Une fois l’installation terminée, laisser ce manuel à la disposition de l’utilisateur final. Dès réception, vérifier le parfait état de l’appareil étant donné que tout défaut d’origine est couvert par la garantie...

 Open the catalog to page 7
HXCBTBR -H HCXTTTR TXBR - TXTR-8

- Vérifier que la mise à la terre, si elle est nécessaire, a été correctement effectuée et que les protections thermiques ou de surintensité ont été réglées conformément aux valeurs données sur la plaque caractéristiques. En cas de branchement du ventilateur à un conduit, celui-ci devra être exclusivement destiné au système de ventilation. Mise en service Avant de faire fonctionner l’installation, effectuer les vérifications suivantes : - La fixation de l’appareil et l’installation électrique ont été correctement effectuées. - Il n’y a pas de reste de matériaux de montage ni de corps étrangers...

 Open the catalog to page 8
HXCBTBR -H HCXTTTR TXBR - TXTR-9

Anweisungshandbuch DEUTSCH Wir bedanken uns für das Vertrauen, das Sie uns durch den Kauf dieses S&P Produktes entgegengebracht haben. Dieses Produkt entspricht den sicherheitstechnischen Regelungen und wurde in Übereinstimmung mit den CE-Bestimmungen hergestellt. Vor dem Einbau und der Inbetriebnahme lesen Sie bitte diese Betriebsanleitung aufmerksam durch. Sie enthält wichtige Hinweise für die Sicherheit während Montage, Inbetriebsetzung und Instandhaltung dieses Produktes. Nach der Installation und Inbetriebnahme übergeben Sie dieses Anweisungshandbuch bitte dem Betreiber. Bitte prüfen Sie...

 Open the catalog to page 9
HXCBTBR -H HCXTTTR TXBR - TXTR-10

- Bevor Sie am Gerät arbeiten, stellen Sie sicher, dass das Gerät vom Stromnetz getrennt ist, selbst dann, wenn das Laufrad nicht dreht. Prüfen Sie die Spannungs- und Frequenzwerte des Stromnetzes auf Übereinstimmunung mit den Angaben des Typenschildes . - Der Elektroanschluss muss entsprechend dem Schaltschema durchgeführt werden. - Stellen Sie sicher, dass der Schutzleiter (Erdung), falls vorhanden, ordnungsgemäß angeschlossen wird. Stellen Sie sicher, dass thermische- und Überstom-Schutzeinrichtungen auf die entsprechenden Grenzwerte voreingestellt sind und dass diese ordnungsmemäss angeschlossen...

 Open the catalog to page 10
HXCBTBR -H HCXTTTR TXBR - TXTR-11

Gebruiksaanwijzing NEDERLANDS Wij willen u graag bedanken voor het vertrouwen dat u in S&P stelt door de aankoop van dit product, dat is geproduceerd in overeenstemming met de CE-normen. Wij verzoeken u voordat u over gaat tot de installatie en de inbedrijfstelling van dit product deze handleiding aandachtig te lezen. Deze bevat belangrijke aanwijzingen voor uw eigen veiligheid en die van de gebruikers tijdens de installatie, het gebruik en het onderhoud. Geef deze handleiding door aan de eindgebruiker na het beëindigen van de installatie. Controleer de goede staat van het apparaat bij het uitpakken....

 Open the catalog to page 11

All Ventur catalogs and technical brochures

  1. RF/EC

    11  Pages

  2. OZI

    2  Pages

  3. LAUTUS

    2  Pages

  4. KABB / KABT

    6  Pages

  5. CAB B

    6  Pages

  6. CAB-PLUS

    6  Pages

  7. CAB ECOWATT

    8  Pages

  8. CAB

    11  Pages

  9. TD KIT

    13  Pages

  10. AFK

    6  Pages

  11. AFH

    3  Pages

  12. AFC-VB

    3  Pages

  13. AFW

    3  Pages

  14. VENT

    44  Pages

  15. TD ECOWATT

    55  Pages

  16. TD SILENT

    49  Pages

  17. REB - ECOWATT

    2  Pages

  18. RMB RMT

    11  Pages

  19. CTB

    44  Pages

  20. Serie COMPACT

    44  Pages

  21. HXM

    18  Pages

  22. CVB - CVT

    44  Pages

  23. TDx

    17  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.