CTB

CTB
1 / 44 PagesView full catalog

CTB

Product catalog summary

Product Overview and Compliance

The product by S&P is manufactured under strict safety regulations and complies with European CE standards, including the Low Voltage Directive 2006/95/EC, Machinery Directive 2006/42/EC, and Electromagnetic Compatibility Directive 2004/108/EC. It is designed for air movement within specified parameters and must not be used in explosive or corrosive atmospheres without prior consultation with S&P Technical Service. Special caution is advised for environments with relative humidity above 95% and rooms with combustion appliances, ensuring adequate air supply for safe operation.

Packaging, Transport, and Handling

  • Always transport and store the product in its original packaging to prevent deformation or damage.
  • Store in a dry, clean place protected from dust and impacts until installation.
  • Do not accept delivery if packaging is damaged or tampered with.
  • Use appropriate lifting equipment for heavy products; never lift by cables, terminal boxes, impellers, turbines, or protective grilles.

Installation Requirements and Safety

  • Installation must be performed by qualified personnel compliant with local mechanical and electrical regulations.
  • Verify that the mounting structure can support the device at maximum operating power and that all fixings are secure.
  • Ensure no loose objects are near the fan or inside ducts that could be sucked in.
  • Check that electrical supply voltage and frequency match the product’s nameplate specifications.
  • Follow wiring diagrams carefully and ensure proper grounding and installation of thermal and overcurrent protections.
  • Ducts connected to the fan must be used exclusively for ventilation purposes.
  • Install appropriate protective devices if the fan is placed in hazardous or user-accessible high-risk areas as specified in S&P’s catalog.

Commissioning and Start-Up Procedures

  • Confirm secure mechanical mounting and correct electrical connections.
  • Verify all safety devices are connected, properly set, and operational.
  • Ensure no foreign objects or installation debris remain in or near the fan or ducts.
  • Check that cable entries and electrical connections are sealed and waterproof.
  • At start-up, verify correct impeller rotation direction and absence of abnormal vibrations.
  • If any electrical protection device trips, immediately disconnect power and inspect the installation before restarting.

Maintenance Guidelines

  • Always disconnect the fan from the power supply before maintenance and prevent accidental re-energizing.
  • Perform regular inspections based on operating conditions to prevent accumulation of dirt on impellers, turbines, motors, and grilles, which can cause hazards and reduce equipment lifespan.
  • Exercise caution during cleaning to avoid unbalancing the impeller or turbine.
  • All maintenance and repair work must comply with applicable national safety regulations.

Recycling and Environmental Responsibility

  • Comply with European Community (EEC) recycling standards by disposing of packaging materials in appropriate recycling containers.
  • Return replaced or end-of-life units to authorized waste handlers to ensure proper recycling and environmental protection.

Key Recommendations and Limitations

  • Do not operate the fan in explosive, corrosive atmospheres, or environments with relative humidity above 95% without prior consultation with S&P Technical Service.
  • Ensure ventilation ducts are dedicated solely to ventilation systems.
  • Verify all electrical protections and grounding before operation.
  • Use protective accessories when installing fans in hazardous or user-accessible high-risk zones.
  • Installation, commissioning, and maintenance must be performed by qualified personnel following local regulations and standards.

Support and Contact Information

For technical support, questions, or service, customers should contact S&P after-sales service in Spain or their local distributor. Additional information and dealer contacts are available on the official website: www.solerpalau.com.

See more

Catalog excerpts

CTB-1

Instructions Manual Manuel d'instructions Gebruiksaan wijzing Instruktions hàndbog instrukcja obstugi Instrukcijq gidas Eyxeipiöio Xpi)onç Kulianma Kilavuzu

 Open the catalog to page 1
CTB-3

Manual de instrucciones ESPAÑOL Le agradecemos la confianza depositada en S&P mediante la compra de este producto, que ha sido fabricado según reglas técnicas de seguridad, conformes a las normas de la CE. Antes de instalar y poner en funcionamiento este producto, lea atentamente el presente libro de instrucciones pues contiene indicaciones importantes para su seguridad y la de los usuarios durante la instalación, uso y mantenimiento de este producto. Una vez finalizada la instalación entrégueselas al usuario final. Compruebe el perfecto estado del aparato al desembalarlo ya que cualquier defecto...

 Open the catalog to page 3
CTB-4

Puesta en servicio. Antes de poner en funcionamiento la instalación, realizar las siguientes comprobaciones: - La fijación del aparato y la instalación eléctrica se han realizado correctamente. - Los dispositivos de seguridad eléctrica están debidamente conectados. - No hay restos de materiales de montaje ni cuerpos extraños que puedan ser aspirados ni en el área del ventilador ni en los conductos si los hubiere. - Sistema de protección de puesta a tierra conectado. - Dispositivos de protección eléctrica conectados, debidamente ajustados y en estado operativo. - Estanqueidad de las entradas de...

 Open the catalog to page 4
CTB-5

Instructions Manual ENGLISH Thank you for placing your confidence in S&P by buying this product. It has been manufactured following current technical safety regulations and in compliance with EC standard. Please read this instructions booklet carefully before installing or starting up the product. It contains important information on personal and user safety measures to be followed while installing, using and carrying out maintenance work on the equipment. Once the product has been installed, please hand in this booklet to the end user. Check that the apparatus is in perfect condition while unpacking....

 Open the catalog to page 5
CTB-6

- If a ventilator is installed in a duct, the duct must be exclusively for the ventilation system. Starting up. Before starting up the machine, make sure that: - The apparatus is well secured and the electrical connections have been carried out correctly. - The safety devices have been adequately connected. - No loose material or fitting remains can be sucked up by the ventilator. If the ventilator has been mounted in a duct, make sure it is clear of loose material. - The earth fittings are adequately connected. - The electrical safety devices are correctly connected, adequately adjusted and...

 Open the catalog to page 6
CTB-7

Manuel d’instructions FRANÇAIS Ce produit a été fabriqué en respectant de rigoureuses règles techniques de sécurité, conformément aux normes de la CE. Avant d’installer et d’utiliser ce produit, lire attentivement ces instructions qui contiennent d’importantes indications pour votre sécurité et celle des utilisateurs, pendant l’installation, l’utilisation et l’entretien de ce produit. Une fois l’installation terminée, laisser ce manuel à la disposition de l’utilisateur final. Dès réception, vérifier le parfait état de l’appareil étant donné que tout défaut d’origine est couvert par la garantie...

 Open the catalog to page 7
CTB-8

- - Vérifier que la mise à la terre, si elle est nécessaire, a été correctement effectuée et que les protections thermiques ou de surintensité ont été réglées conformément aux valeurs données sur la plaque caractéristiques. En cas de branchement du ventilateur à un conduit, celui-ci devra être exclusivement destiné au système de ventilation. Mise en service Avant de faire fonctionner l’installation, effectuer les vérifications suivantes : - La fixation de l’appareil et l’installation électrique ont été correctement effectuées. - Il n’y a pas de reste de matériaux de montage ni de corps étrangers...

 Open the catalog to page 8
CTB-9

Anweisungshandbuch DEUTSCH Wir bedanken uns für das Vertrauen, das Sie uns durch den Kauf dieses S&P Produktes entgegengebracht haben. Dieses Produkt entspricht den sicherheitstechnischen Regelungen und wurde in Übereinstimmung mit den CE-Bestimmungen hergestellt. Vor dem Einbau und der Inbetriebnahme lesen Sie bitte diese Betriebsanleitung aufmerksam durch. Sie enthält wichtige Hinweise für die Sicherheit während Montage, Inbetriebsetzung und Instandhaltung dieses Produktes. Nach der Installation und Inbetriebnahme übergeben Sie dieses Anweisungshandbuch bitte dem Betreiber. Bitte prüfen Sie...

 Open the catalog to page 9
CTB-10

- Bevor Sie am Gerät arbeiten, stellen Sie sicher, dass das Gerät vom Stromnetz getrennt ist, selbst dann, wenn das Laufrad nicht dreht. Prüfen Sie die Spannungs- und Frequenzwerte des Stromnetzes auf Übereinstimmunung mit den Angaben des Typenschildes . - Der Elektroanschluss muss entsprechend dem Schaltschema durchgeführt werden. - Stellen Sie sicher, dass der Schutzleiter (Erdung), falls vorhanden, ordnungsgemäß angeschlossen wird. Stellen Sie sicher, dass thermische- und Überstom-Schutzeinrichtungen auf die entsprechenden Grenzwerte voreingestellt sind und dass diese ordnungsmemäss angeschlossen...

 Open the catalog to page 10
CTB-11

Gebruiksaanwijzing NEDERLANDS Wij willen u graag bedanken voor het vertrouwen dat u in S&P stelt door de aankoop van dit product, dat is geproduceerd in overeenstemming met de CE-normen. Wij verzoeken u voordat u over gaat tot de installatie en de inbedrijfstelling van dit product deze handleiding aandachtig te lezen. Deze bevat belangrijke aanwijzingen voor uw eigen veiligheid en die van de gebruikers tijdens de installatie, het gebruik en het onderhoud. Geef deze handleiding door aan de eindgebruiker na het beëindigen van de installatie. Controleer de goede staat van het apparaat bij het uitpakken....

 Open the catalog to page 11

All Ventur catalogs and technical brochures

  1. RF/EC

    11  Pages

  2. OZI

    2  Pages

  3. LAUTUS

    2  Pages

  4. KABB / KABT

    6  Pages

  5. CAB B

    6  Pages

  6. CAB-PLUS

    6  Pages

  7. CAB ECOWATT

    8  Pages

  8. CAB

    11  Pages

  9. TD KIT

    13  Pages

  10. AFK

    6  Pages

  11. AFH

    3  Pages

  12. AFC-VB

    3  Pages

  13. AFW

    3  Pages

  14. VENT

    44  Pages

  15. TD ECOWATT

    55  Pages

  16. TD SILENT

    49  Pages

  17. REB - ECOWATT

    2  Pages

  18. RMB RMT

    11  Pages

  19. Serie COMPACT

    44  Pages

  20. HXM

    18  Pages

  21. CVB - CVT

    44  Pages

  22. TDx

    17  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.