CAB-PLUS

CAB-PLUS

CAB-PLUS

Product catalog summary
Application
CAB-PLUS in-line duct fans are designed for low-height installations, ideal for suspended ceilings in public buildings such as libraries, conference rooms, offices, restaurants, classrooms, and audio studios.

Construction
The fans feature a soundproof enclosure with two silenced single-sided centrifugal fans. They can be installed both indoors and outdoors, in vertical or horizontal positions. The casing is made of galvanized sheet steel with rubber gaskets on the inlet and outlet nozzles.

Motor Specifications
The fans are equipped with asynchronous, single-phase motors (220-240V, 50/60Hz) with an IP44 protection rating and external rotor. They have an insulation class B and are designed for voltage-controlled speed control. The motors are two-speed.

Technical Characteristics
The document provides detailed specifications for different models (CAB-PLUS 125, 160, 250, 315) including voltage, speed, power, current, airflow, operating temperature, sound pressure level, and weight.

Performance and Acoustic Characteristics
Performance curves and acoustic characteristics are provided for each model, showing static pressure, absorbed power, and airflow. Acoustic data is detailed across various frequencies.

Dimensions
Dimensions for each model are provided, detailing measurements such as height, width, and depth.

Accessories
A range of accessories is available, including channel filters, backdraft shutters, antivibration connectors, flexible silencers, and throttles. Each accessory is listed with its corresponding part number.

Electrical Accessories
Electrical accessories include gear selectors, thermostats, air quality sensors, humidistats, and various types of regulators. Part numbers are provided for each accessory.

ERP Characteristics
Energy-related product (ERP) characteristics are detailed for residential (RVU) and non-residential (NRVU) units, including supplier name, article number, SEC class, device category, type of drive, and sound power level.

Regulatory Compliance
The document references compliance with EU regulations for residential and non-residential ventilation units.
See more

Catalog excerpts

CAB-PLUS-1

APPLICATION CAB-PLUS is characterized by low height, which is recommended for installation in suspended ceilings. Idealforventilation of public buildings, libraries, conference rooms, offices, restaurants, classrooms, audio studios, etc. CONSTRUCTION Fans with soundproof enclosure type CAB-PLUS area series of two silenced single-sided centrifugal fans designed for installation in indoor and outdoor installations in a vertical or horizontal position. The fan casing is made of galvanized sheet steel. The rounded inlet and outlet nozzles a re fitted with rubber gaskets. MOTOR The fans are equipped with asynchronous, single-phase 220-240V, 50/60Hz and have an IP44 protection rating with external rotor. Insulation class B. CAB-PLUS have two-speed motors. Motors are designed forvoltage-controlled speed control. Electrical connection diagram fig.9 p.663. TECHNICAL CHARACTERISTICS speed maximum maximum airflow operating sound absorbed absorbed at free temp. pressure power current discharge min | max level* [obr/min] [W] [A] [m3/h] [0C] [dB(A)] * measured at a distance of 3m from the fan.

 Open the catalog to page 1
CAB-PLUS-2

in-line duct ton PERFORMANCE CURVES ACOUSTIC CHARACTERISTICS Hz/dB(A) • - highest efficiency point.

 Open the catalog to page 2
CAB-PLUS-3

in-line duct ton PERFORMANCE CURVES ACOUSTIC CHARACTERISTICS Hz/dB(A) • - highest efficiency point.

 Open the catalog to page 3
CAB-PLUS-4

CAB-PLUSDIMENSIONS [mm] ACCESSORY ASSEMBLY 1 Type backdraft shutter antivibration flexible silencer AKU COMP throttle IRIS vent KWO CAR-PL connector ACOP PL

 Open the catalog to page 4
CAB-PLUS-5

CAB-PLUS ELECTRICAL ACCESSORIES selector thermostat thermostat sensor thermostat thermostat sensor

 Open the catalog to page 5
CAB-PLUS-6

in-line duct ton ERP CHARACTERISTICS RVU* f type of heat recovery system g thermal efficiency of heat recovery [%] h maximum flow rate [m3/h] i electric power input [W] j sound power level [dB(A]] k reference flow rate [m3/s] l reference pressure difference [Pa] o maximum external leakage for BVU [%] q position of visual filter warning r instructions for installing supply grilles t airflow sensitivity to pressure variation v annual electricity comsumption - average climate [kWh/a] v annual electricity comsumption - warm climate [kWh/a] v annual electricity...

 Open the catalog to page 6

All Ventur catalogs and technical brochures

  1. RF/EC

    11  Pages

  2. OZI

    2  Pages

  3. LAUTUS

    2  Pages

  4. KABB / KABT

    6  Pages

  5. CAB B

    6  Pages

  6. CAB ECOWATT

    8  Pages

  7. CAB

    11  Pages

  8. TD KIT

    13  Pages

  9. AFK

    6  Pages

  10. AFH

    3  Pages

  11. AFC-VB

    3  Pages

  12. AFW

    3  Pages

  13. VENT

    44  Pages

  14. TD ECOWATT

    55  Pages

  15. TD SILENT

    49  Pages

  16. REB - ECOWATT

    2  Pages

  17. RMB RMT

    11  Pages

  18. CTB

    44  Pages

  19. Serie COMPACT

    44  Pages

  20. HXM

    18  Pages

  21. CVB - CVT

    44  Pages

  22. TDx

    17  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.