OPERATION AND MONTAGE MANUAL NO. 08M2014/1 – ENGLISH valid from 16.07.2015 OPERATION MANUAL AXIAL FAN TYPE AFK 42516000 AFK-315 RU 42516010 AFK-355 RU Venture Industries Sp. z o.o. is not responsible for any damage caused by improper use of the fan and reserves the right to modify this document without informing the user. Venture Industries Sp. z o.o. Mokra 27 05-092 Łomianki-Kiełpin, Polska http://www.venture.pl e-mail: [email protected]

Venture Industries Sp. z o.o. Mokra 27 05-092 Łomianki-Kiełpin Polska INTRODUCTION This manual covers fan listed on the title page. It is source of information necessary for safe and proper use. Read this manual carefully before any use of the device, comply with it requirements and keep it in place with easy access for users and service. If case of any doubts about use of the fan, please contact with manufacturer. After receiving the device - check • whether the device is in compliance with order, • whether the data on the rating plate are the same as desired (voltage, frequency, power etc.)...

Venture Industries Sp. z o.o. Mokra 27 05-092 Łomianki-Kiełpin Polska 2. TRANSPORT AND STORAGE During transport and storage follow the guidelines contained in 1 chapter and transport and storage guidelines. 2.1 transport and storage guidelines • The fan should be transported and stored in original packaging, without excessive shocks. The device must be protected from weather conditions, transported and stored in dry, well ventilated, and free from substances harmful to the device, areas. The fan cannot by transported and stored in areas with fertilizers, chlorinated lime, acids and other aggressive...

Venture Industries Sp. z o.o. Mokra 27 05-092 Łomianki-Kiełpin Polska • Ensure that there are no foreign bodies near and inside the fan, the impeller is not blocked, the unit is clean, dry and secured after maintenance and review. 4.2 unit maintenance and review During review and especially before first use of the unit or after long time period of storage attention to the following should be paid: • accumulation of the dirt on the unit and filter (if used), state of grid, • is the device stable, not damaged, the structure is complete, moving elements can move freely, • if there are any foreign...

OPERATION AND MONTAGE MANUAL output power level (long pushing of the buton) blinking during configuration mode: level of the start power duration of start-up in seconds whether the start-up is with the increased increasing the output power configuration mode (long pushing of the button)

declares that the product compiles with the requirements of: • Electromagnetic Compatibility Directive 2004/108/EC Following standards were applied: OPERATION AND MONTAGE MANUAL described below: transport of specified medium • In accordance with 2006/42/EC Directive requirements: The technical documentation for above mentioned product has been prepared in accordance with Directive 2006/42/EC and is located in manufacturer office: Lotnicza 21A, 86-300 Grudziqdz, Poland. The person authorized to comply the relevant technical documentation: Janusz Kazmierczak (Lotnicza 21A, 86-300 Grudziqdz, Poland)....