Electric heaters, water coils and controls for ventilation units and systems
24Pages

Electric heaters, water coils and controls for ventilation units and systems

Electric heaters Water Coils 10 Circular Water Heater Circular Water Cooler 12 Rectangular Water Heater Rectangular Water Cooler Controllers ReguLite, Regular Ventik 17 Control systems and components for AHU 18 HPE - TPE 20 KPT - KPH 21 TJK - TJP 22 Accessories 23

VENTMATIKA UAB has been counting its years of successful activity since 2003. The company specializes in development and manufacturing of electronic, electrical, control automation products and water coils for ventilation units and systems. The range of products and their individual components is wide, the quality meets all the required standards. The aim is to always meet the customer's needs by selecting the most optimal and up-to-date technical solutions. Certified for: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018. Be the best choice for heating, controls and accessories for ventilation...

Using precision machinery and experience acquired through years of designing and manufacturing we offer durable electric heaters with various control options. This allows flexibility and creativity in offering tailor made solutions for our clients. There are no moving parts in the heater as the load is controlled by a triac, which ensures a long product lifetime. Aluzinc coating provides protection from rust for up to 15 years! The standard range of electric heaters consists of circular and rectangular duct mounted electric heaters with various control options.

Bespoke heaters developed by provided requirements - size, shape, power output, control options. R&D will always work close with a client to achieve the best result. Power output starting from 0.3kW. Various combinations available. Pricelist of standard sizes and outputs provided upon request. Warranty – 2 years. 100% of products are checked by QA before leaving the factory. Manual reset 500C Automatic reset 1000C 1 Possible accessories: Differential pressure switch, air flow sensor, contactors 2 Standard- AluZinc Possible options: Galvanized or Stainless steel (only for rectangular...

Electric heaters Used internally in air handling units, these heaters are designed and manufactured per project basis, as every project might require different parameters. Frame is made using Aluzinc coated steel, which is highly resistant to corrosion. Heating elements are made from stainless steel AISI304. All heaters are made with thermal protections- automatic at 50°C and manual- 100°C. Other options available! These heaters do not have limits on size and power output, therefore please contact our sales team with an inquiry for an offer or partnership possibilities. We are in Aircalc++...

Control options ^ Type ON/OFF Heater is controlled by external ON/OFF switch. Required accessories: Heater works autonomously. Required accessories: Equipped with an airflow sensor & a differential pressure switch. -= ; Heater works autonomously. Requires external temperature setpoint (0.30): TR5K, TR5KNTC10 (with internal sensor) Heater works autonomously. Type NIS External 0.10V control Type ESKM External 6.24V PWM control. Additional automatic thermostat of 70oC for ESKM module protection. Type ModBus External control via ModBus RTU protocol. RS485 connection. Included in price of the...

For single and two-phase duct heaters EKR 6.1 EKR 6.1 is a PWM controller for electric heater control. Has a built in and a possibility to connect a duct mounted sensor to control supplied, or room temperature. Setpoint can be chosen 0...30°C or 0...60°C. Operation modes are chosen with help of jumpers. When working by room air temperature supply air temperature MIN,MAX values must be set with help of potentiometers inside the controller. Timer (NIGHT FUNCTION) - possibility to reduce heating setpoint at night up to 10°C with externally connected timer. Type Controlled load [kW] Max....

^ EKR15.1, EKR30 are PWM controllers for electric heaters. ^ EKR15.1P, EKR30P are PWM controllers for multistep (up to 5 steps) electric heaters Setpoint can be chosen 0...30°C or 0...60°C ^ Operation modes are chosen with a help of jumpers. When working by room air temperature. (external potentiometer with NTC sensor must be used) Supplied air temperature MIN, MAX must be set with a help of potentiometers inside the controller. Timer (NIGHT FUNCTION) - possibility to reduce heating setpoint at night up to 10°C with externally connected timer. ^ All above mentioned controllers can be...

Water coils We offer a wide range of finned coils for heating or cooling systems. Selection tool available for implementing to AHU builder software or as stand-alone version. The geometry of the heat exchanger was developed by a group of experienced engineers and tested in external laboratories. The product was developed together with the DMT laboratory in Germany in order to guarantee effective heating and cooling. Resistant to the vast majority of primary fluids Max fluid velocity: 3 m/s in tubes Airflow range at a temperature of -40oC: 0.03–40 m3/s Galvanized steel, aluzinc Water, ethyl

Circular Water Heater 6 standard sizes Hot water coil with 2 or 3* tube rows Duct connection with rubber seals Air tightness class D to EN 15727 Removable cover for inspection and cleaning Aluzinc coated steel casing The coils are tested for leakage CWH size table, 2 and 3* tube rows, 0 in mm * 3 tube rows made from hydrophilic aluminum

Circular Water Cooler 6 standard sizes 3 tube rows, made from hydrophilic aluminum Stainless steel condensate tray Duct connection with rubber seals; Air tightness class D to EN 15727 Removable cover for inspection and cleaning Aluzinc coated steel casing The coils are tested for leakage CWC size table, 3 rows, 0 in mm:

Rectangular Water Heater RWH Max operating temperature: +110 C0 Max operating pressure: 1,0 MPa (10 bar) The coils are tested for leakage 10 standard sizes How water coil with 2 or 4 tube rows Easy to mount duct connection Air tightness class C to EN 15727 Aluzinc coated steel casing