Imtech DryGenic helps the food industry to produce better quality products in controlled temperature/humidity environment while minimizing utility usage and maximizing production rates. YOUR PARTNER Imtech DryGenic dryers are designed for durability, sanitation and reliability and control temperature and humidity as required, delivering desired levels even with varying air inlet conditions. DRYING OF PRODUCTS The current demand of high-quality dehydrated products with properties with similar levels as found in the initial fresh product. In addition, the drying process should have a low production cost and a low environ-mental impact. The Imtech DryGenic belt dryers are used to dry all kinds of product like; vegetables, fish, meat, and fruit products. Besides the drying of food and agriculture products, the belt dryer can also be used for dehydration of various chemical and pharmaceutical products. The dryer can be used for the drying of flaked, striped, noodle, cube and granule materials. This Imtech DryGenic dryer has the characteristics of high efficiency and low energy. The design and the selection of the dryer is decided by the wet and the dry product flow characteristics, lump / crust formation tendency and the thermal sensitivity. The dryer capacity and size and performance depends on the available heat transfer area and the operating conditions for the specific product. The combination of temperature cycles and drying times can be adjusted accordingly as to control the final products physical properties. The belt conveyor of the dryer that loads drying material is based on single or multiple layers stainless steel belt. Because the air flows through the belt, the heat exchange is completely and evenly, production efficiency is high and the product quality is very good.GENERAL DESCRIPTIONS The raw material can be spread on the conveyer belt through suitable auxiliary mechanism such as distributor, vibrating belt, pulveriser or granulator. The drying tunnel is divided into zones, each maintaining a different temperature. > Belt dryer 1/4 size="-2">

Each zone unit is equipped with an air heating and circulation system and if necessary a damp exhaust system. When the conveyor passes it, hot air passes through raw material from up to low or from low to up. In this way it makes raw material dry uniformly. Depending on product the tunnel can be equipped with a cooling section and vibration device in outlet to decrease the final product temperature and make it convenient to package in time. The Imtech DryGenic belt dryers offer many operational benefits: Custom made dryer Optimum time/drying curves for each product Continuous drying system Suitable...

IMTECH DRYGENIC Imtech DryGenic unites dehumidification expertise and customer-focused service to each application. For over 50 years Imtech DryGenic have manufactured dehumidification systems and is recognised globally for expertise, quality, service and providing innovative solutions for complex dehumidification processes. The requirements in for instance the food, electronic and pharmaceutical industries are frequently adjusted.To serve the changing needs of industrial, institutional and commercial users, new product lines are being continually developed. The Imtech DryGenic systems come in...