High-pressure fans We make air work on your behalf

When the pressure’s on High-pressure fans from Venti … Venti high-pressure fans combine intelligent technology with outstanding quality. They are the first choice where safe operation and high availability are required alongside optimum efficiency and low energy consumption. Venti high-pressure fans can be used in almost limitless ways. They are used as pressure-increase fans in industrial processing and chemical engineering, for the fluidisation of powders, dusts and granulates in the cement, paint and plastics industry, as forced-draft fans for firing plants, as combustion air fans in industrial...

… outstanding in every situation Special features Venti can fit v-belt drives to its high-pressure fans – both the single- and the two-stage models. The fans can be built using heat- and acidproof materials if required. Explosion-protection features and gas-tight versions are also included in the Venti range. Type HV-ZM Type HV-K High-pressure fan with indirect motor drive through shaft and coupling • Drive shaft: mounted in two roller bearings, two bearing housing with lubricant regulators • Coupling and motor: flexible coupling joins shaft and motor. Motor and two bearing housing mounted on...

Star turn High-pressure fans with rotatable casings … Total pressure difference Δ pt: 30 mbar – 160 mbar (at 20 °C and ρ = 1.205 kg/m³) 1 mbar ≙ 100 Pa ≈ 10.2 mm WC Dust level: max. 50 mg/m3 Motor rating Rated speed: n = 3000 rpm, frequency: 50 Hz Impeller made from cast silumin Impeller made from welded aluminium Impeller made from steel „A“-rated sound pressure level as per DIN 45635 with inlet and outlet connected, under free field conditions „A“-rated sound pressure level measured at a distance of 1 m at an angle of 45° from the inlet, with outlet connected, under free field conditions Total...

5 … for different pressure ranges Motor Sound pressure Weight with output level (dB(A)) motor (kg) (kW) Lp1) Lp2) M3) K3)

Direction of rotation and discharge positions Dimensions Inlet (ØD) and outlet flange (Ød)

Double-barrelled performance Two stages for maximum pressure Motor Sound pressure output level (dB(A)) (kW) Lp1) Lp2) Pressure range 250 mbar ≙ 25000 Pa ≈ 2500 mm WC Impeller made of steel 250- 63 250- 80 250-100 250-125 250-140 250-160 250-180 Flange for connection on inlet and outlet side as per DIN 2641 Series 1 ND6 Direction of rotation and discharge position of the second stage

Precision-fitting effectiveness The ideal accessories for high-pressure fans Venti customises its highpressure fans for each situation, and can fit them with the following components: • Securable throttle valves for mounting on the outlet side • Splitter, pipe and disc silencers • Acoustic enclosures for reducing noise levels by up to 25 dB • Inlet filters • Flexible joints and vibration dampers for isolated mounting Vibration dampers Flexible joints The dynamic forces transmitted into the foundation can be reduced by installing vibration dampers, whose design and distribution depend on the type...

Working on the quiet Effective sound insulation for a good working environment Acoustic enclosures for high-pressure fans Noise reduction is legally mandatory and improves working conditions, which is why we recommend the use of acoustic enclosures. They effectively absorb the sound energy radiated by the fan. Absorption silencer with casing Venti acoustic enclosures comprise several easy-toassemble wall and roof sections. There is an access opening, either a door or a flap depending on the size of the enclosure, to allow easy access for fan maintenance. Our splitter silencers are specially designed...

Industrial fans Dust collection and process air cleaning plants Exhaust air treatment plants Ventilating, heating and air conditioning plants Recycling and waste processing plants Surface technology