IPA
1 / 1 PageView full catalog
IPA
Product catalog summary
Product Overview
The document describes the features and specifications of an indoor post insulator made from red epoxy resin with OT58 brass fittings. It is designed for use as a support for indoor Medium Voltage bus bars, with an operating temperature range from -25°C to +100°C.
The document describes the features and specifications of an indoor post insulator made from red epoxy resin with OT58 brass fittings. It is designed for use as a support for indoor Medium Voltage bus bars, with an operating temperature range from -25°C to +100°C.
Reference Standards
The insulator complies with IEC 60273 and IEC 60660 standards.
The insulator complies with IEC 60273 and IEC 60660 standards.
Routine Tests
The insulator undergoes routine tests including visual and dimensional checks, bending stress tests, and glass transition temperature assessments.
The insulator undergoes routine tests including visual and dimensional checks, bending stress tests, and glass transition temperature assessments.
Tests on Demand
Additional tests available upon request include power frequency tests, partial discharge measurements, dry lightning impulse tests, deflection under load at normal ambient temperature conditions, and water absorption tests.
Additional tests available upon request include power frequency tests, partial discharge measurements, dry lightning impulse tests, deflection under load at normal ambient temperature conditions, and water absorption tests.
Technical Specifications
The document provides a detailed table of technical specifications for various models of the insulator, including:
The document provides a detailed table of technical specifications for various models of the insulator, including:
- Maximum Operating Voltage: Ranges from 3.6 kV to 40.5 kV.
- Lightning Impulse Voltage Withstand: Ranges from 40 kV to 200 kV.
- Power Frequency Voltage Withstand: Ranges from 11 kV to 105 kV.
- Ultimate Bending Stress: Ranges from 4 kN to 16 kN.
See more
Catalog excerpts
indoor post insulator FEATURES Red epoxy resin post insulator for indoor use with OT58 brass Used as support for indoor Medium Voltage bus bars. Opera ng temperature from -25°C to +100°C. REFERENCE STANDARDS IEC 60273; IEC 60660 ROUTINE TESTS • Visual and dimensional check • Bending stress • Glass transi on temperature TESTS ON DEMAND Ultimate bending stress Power frequency voltage withstand Ligh ing impulse voltage withstand • Power frequency test • Par al discharges measurement • Dry ligh ng impulse test • De ec on under load at normal ambient temperature condi ons • Water absorp on test
Open the catalog to page 1All Veneta Isolatori catalogs and technical brochures
TBR 400-630A-1250A1 Page
PSE-PSL1 Page
IPS1 Page
TBS 250A1 Page
Related Searches
- Panel panel meter
- Illuminated indicator
- LED indicator
- Voltage indicator
- Metal bushing
- Fuse holder
- Plastic bushing
- Cable bushing
- Connection bushing
- Threaded bushing
- DIN rail indicator
- Transformer bushing
- Insulation bushing
- Epoxy resin bushing
- Power transformer bushing
- EPDM bushing
- Rubber bushing
- Oil transformer bushing
- Epoxy bushing
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.