Technical Datasheet Venaflon® FULL - X Applications Venaflon FULL-X is a highly flexible universal hose and its main characteristic is that it is conductive and, therefore, suitable for working areas requiring utmost safety. It is specially recommended for the transport of liquid or semi-liquid fluids in the food, cosmetic, chemical and pharmaceutical industries, specially, when the chemical products are highly flammable. This hose is able to transport liquid or semi-liquid food-stuffs by impulsion or suction, since its design can resist either pressure or vacuum. The perfluorinated inner liner ensures utmost chemical and temperature resistance, an excellent impermeability and absolutely hygienic and contamination-free delivery of fluid. Limitations Respect the bending radius and work pressure established values. Mind the chemical compatibility of the fluid with the inner PFA. Not autoclavable. Regulations The inner layer of PFA is in compliance of: − US FDA Standard 21 CFR 177.1550 Properties - Odorless, tasteless and completely non-toxic. - High flexibility - The hose presents a resistivity lower than 109. - Black and smooth appearance of the inner layer of PFA and black and smooth outer rubber layer. - Can be equipped with 316L stainless steel fittings on each end with a roughness value of less than 0,8 m (or 0,5 m on request). - Operational temperature range from -20°C to +65°C in accordance with EN 12115:2011. - Steam disinfection with peaks up to +164ºC for maximum 20 min. - The hose is manufactured in a maximum length of 20m (65.62 ft). - The vacuum resistance is 0.9 bar (13.05 psi). USP Class VI <88> in vivo tests USP Class VI <87> in vitro tests - Construction: PFA, fully fluorinated, mirror-smooth, black colour, antistatic (106) - Reinforcement: high strength plies of synthetic cord, embedded steel helix wire and built-in copper wires - Outer layer: synthetic black rubber, resistant to abrasion, weather, oils and fats. It is completely smooth. Technical Specifications Contact your sales office for more information [email protected]

Technical Datasheet Venaflon® FULL - X Inner Diameter Wall Thickness Technical information for explosive atmospheres Reference standards ATEX standard Classification of hose grades This reference is outside the scope of the ATEX Directive due to the fact it is a product having not their own source of ignition. CE branding and ATEX logo branding are forbidden on these hoses. Electrical features information ISO 8031:2020 / EN12115 (if is complete with end fittings) R<100Ω Continuous electrically bonded ISO 8031:2020 & IEC/TS 6007932-1:2013 Conductive inner lining (incorporating conductive only...

Technical Datasheet Venaflon® FULL - X - This hose cannot be used for transport of explosive materials. - Properly connect of the hose to earth (is necessary earth the hose metal fittings or directly the wire of both ends of the hose). - The end-to-end resistance of the hose should be checked regularly to ensure that this bonding remains intact. recommendable to perform this check before each use. - It is not allowed a prolonged friction in the surface of the hose. - The hose must be clean of flammable products. - The hose should be inspected over the entire length for signs of hardening, abrasion,...