Primarily designed for coolants (water & glycol) in water-cooling systems where high resistance to pressure and elevated temperatures is required. The silicone material, along with textile reinforcements, ensures dimensional stability and durability in systems subjected to continuous thermal cycling. • Cooling and heating circuits in buses, coaches, trucks, and industrial vehicles. • Cooling systems in cogeneration units and marine engines. • Transfer of high-temperature fluids in general industrial processes. Fluid solutions. Solid performance.

• Chemical Compatibility: Not affected by anti-freeze or anti-rust liquids. • Mechanical Performance: Highly resistant to hardening, with excellent compression characteristics. • Assembly Flexibility: Outstanding flexibility facilitates easy installation and assembly. • Appearance: Smooth inner and outer surfaces, standard blue color. Other colors (red, green, black, etc.) available upon request. • Thermal and Environmental Resistance: Excellent resistance to thermal aging and oxidizing agents such as oxygen, ozone, and UV radiation. • Operating Temperature Range: From -60 °C (-75 °F) up to +180...

Respect the work pressure established values. For optimal performance, it is recommended to be installed in straight sections without tight bends or curves. Hydrocarbon and oil stains do not damage the hose, but it should not be used to transport fuel or oil, nor be submerged in these liquids. It is not recommended for applications with negative pressure (vacuum). It is not recommended for the transport of abrasive particles. Fluid solutions. Solid performance.

IMPORTANT: The Company reserves the right to change, amend, modify, suspend, continue or terminate all or any part of this Document at any time without notice. It is the user’s responsibility to ensure the suitability and safety of the VENAIR products for all intended uses. All the tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of the hoses in any particular application. Vena, Venair and the Venair logo are trademarks of Venair Ibérica SAU Copyright 2025|Venair Group|All Rights Reserved www.venair.com