This product is recommended for use in water cooling and heating systems, especially in the Railway sector, but also in many others, for cooling any type of engine or equipment where certain security against fire is required. Its high fire resistance properties make it an ideal product for highly sensitive applications such as cooling electric devices like transformers or batteries, as well as electronic equipment like data servers. The good classification acc. to EN-45545-2 railway standard, proves its good behavior against fire and its low level of fumes density and toxicity.

• Blue color hose with smooth inner and outer surface. • Not affected by anti-freeze or antirust liquids. • Excellent flexibility to absorb high vibrations, compensate any level difference and improve the assembly process. • Highly resistant to hardening with very good compression characteristics. • Excellent resistance to thermal aging and oxidizing agents (oxygen, ozone, UV). • Operational temperature ranges from -60°C (-75 F) to +200°C (392 F), it may reach up to 220°C (428 F) during short periods of time. • Manufactured with inner diameters ranging between 6mm and 102mm, in straight lengths...

• The product is classified as HL3 R23 & HL2 R22 acc. to European standard EN-45545-2. • The product is classified as V0 acc. to flammability spec. UL-94. • Silicone rubber used in compliance with the RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863. • Respect the working pressure established values. • Gas oil and oil stains do not damage the hose, but it should not be used to transport fuel or oil, nor be submerged in these liquids. • The standard construction is not recommended for applications with negative pressure...

IMPORTANT: The Company reserves the right to change, amend, modify, suspend, continue or terminate all or any part of this Document at any time without notice. It is the user’s responsibility to ensure the suitability and safety of the VENAIR products for all intended uses. All the tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of the hoses in any particular application. Vena, Venair and the Venair logo are trademarks of Venair Ibérica SAU Copyright 2024|Venair Group|All Rights Reserved