Anode and Cathode Vena® PEM FUEL is specially designed to fulfill the main requirements to use in the cathode and anode of PEM (polymer electrolyte membrane) Fuel Cell and electrolyzer systems. Specially designed for the passage of gases as hydrogen and oxygen.

VENA®PEM FUEL • Low degree of permeability to gases. FKM material has lower permeability values to hydrogen gas compared to silicones and some other elastomers. • Excellent resistance to thermal aging and oxidizing agents (oxygen, ozone, UV). • Good mechanical properties. • Excellent purity - extremely low extractables and volatile compounds content. • Cleaning protocol is applied to reduce the amount of environmental and production contaminants. Pharma-grade treatment. • Excellent chemical resistance. • Hoses are capped so that they can be delivered with the lower possible level of contaminants....

VENA®PEM FUEL This reference can be classified as V0 or V1 by the flammability specification UL-94 (flame retardant and selfextinguishing) under request. This reference is in accordance with the RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863. This construction can be certified by TAP00002FX (DNV-CP-0183) "Flexible hoses for Fuel Cells in Maritime Industry" under request. It can be certified to use it in Hydrogen and Oxygen circuits Inner Diameter

VENA®PEM FUEL The inner layer is from FKM, a fluoropolymer elastomer. The typical properties of this elastomer are listed below: Fluid solutions. Solid performance.

The outer VMQ silicone rubber compound is an organopolysiloxane mixture. The typical properties of this silicone are listed below: Respect the work pressure established values. High temperatures may affect the bursting and working pressure values. This type of tube is not recommended for applications with negative pressure (vacuum), except Vena® PEM FUEL WIRED alternative.

VENA®PEM FUEL